ThreeDJ16 Posted August 12, 2008 Report Share Posted August 12, 2008 Ok, been working for a little while to get Guru folks to sell a Guru inducer tube specifically for the KK. Their web site ordering is currently down for issues, but when it returns the KK inducer tube will be on it. Also, you can order the part by phone: 1 800 288 4878 ext 241. It is part # 800-1001-014 I should mention, this inducer tube is for silicone mounting. It is very simple to use a bit of silicone to mount it in place. This is also a flush mount...you will not have extra tube sticking out in front of the Guru port. If you still prefer not using silicone, you can always purchase the longer bulkhead inducer port which will stick out in front of the Guru port plate. -=Jasen=- Edit...based on information from PaulR: If you are thinking of getting a Stoker, might want to get the non-silicone bulkhead adapter since you will have to swap tubes if you have a Guru and a Stoker. Thanks Paul. Link to comment Share on other sites More sharing options...
PJFLASH Posted August 12, 2008 Report Share Posted August 12, 2008 Thanks DJ, After all the information on the forum I still was not sure which tube to order to get the flush fit. Now I can order a Guru and know the inducer tube will fit correctly with no mods. Thanks !!!!!! Link to comment Share on other sites More sharing options...
