ThreeDJ16 Posted November 8, 2006 Report Share Posted November 8, 2006 Great idea too Greg! BTW, does anyone happen to have the diameter and depth of the polder hole and rotisserie hole? Appreciated. -=Jasen=- Polder tube is 2" long and .53" diameter. Thanks for the info. Very odd size for the hole. I am gonna take a guess here and say Dennis is probably using 5/8" SS Tubing (18mm) which is the outside diameter and would have an odd ID like that. I will have to look around in my scrap pile as I just might have a piece of tubing already that size. Anyway, thanks again for the info. -=Jasen=- Quote Link to comment Share on other sites More sharing options...
Fetzervalve Posted November 8, 2006 Report Share Posted November 8, 2006 You guess'ter Lester, 5/8" OD tube.... I guess I get a little confused, I see talk about getting tight seals on the lid etc. then we have a half inch hole sitting wide open. Maybe that's why I get venting everywhere with the Guru running and my hole plugged. (down Curly) I could leave it open, but I have table sitting beside to hold the Guru control & necessary stuff and the tube vents directly on my stuff. I use my (now brown) towel chunk to plug the hole whether or not I have probes running through it. It's not a big deal, but looks kinda cheeeezy when ya start thinking about it. Quote Link to comment Share on other sites More sharing options...
