List of user-friendly features

[FAQuestions]

You talk about user-friendly features, please list and explain.

[FAQuestions]

Let’s start from the top and work our way down.

Let’s start from the top and work our way down.

•The damper top has a machined large thread 304 stainless steel shaft that of course will never rust. It is seated in a stainless three-point bracket with a brass sleeve that prevents it from binding when heated.

•The damper top has two gaskets an inner top and an outer lower. When the top is closed the two gaskets seal against each other as well as against the body and top. Twice the gasket coverage.

•The top dome and lower half feature our unique two-layer design which is discussed at length on a previous FAQ.

•The handle trigger-latch opens the lid slowly and automatically. No lifting is needed to open the lid.

•A user-adjustable spring hidden in the hinge keeps the top open on it's own. When the lid is closed, the trigger-latch self-locks to the base with no extra effort. Just close the lid and, click, it's locked.

•This spring hinge is coupled to straps built into the body for a lifetime of perfect alignment.

•All of our grills feature large gage 304 stainless grills with an access door and front and rear handles.

•The main seal is also the two gaskets design.

•There are built in sockets for using an E-Z Que Rotisserie. This can be used with the top closed, an industry first.

•Sitting in front of this socket is a polder access tube. No need to run your wires over your gasket.

•A two-piece interlocking firebox prevents expansion and contraction cracking that plagues other ceramic grills.

•Sitting on our firebox is our charcoal bowl that has a rack to set a sear grill to get your meat right down on top for a high temp sear.

•All of our grills have a CNC laser cut lower draft doorframe assembly that creates a perfect airtight seal, no leaks on this grill.

•The lower draft door has a CNC laser cut dial that gives absolute low airflow control.

•To the right of the draft door is a CNC laser cut faceplate which a BBQ Guru inducer tube clicks into. Easy instant installation, no need to cut your door or grill.

•All these features roll on German nylon wheels.

There you have it.. Top to bottom, quality.