LarryR Posted January 22, 2010 Report Posted January 22, 2010 To run my Stoker on the KK is THIS only part I need from BBQ Guru? Here's the piece (on left) that I have from Rocks that connects to my fan:
cruzmisl Posted January 23, 2010 Report Posted January 23, 2010 Why are you on the BBQ Guru website when you have a Stoker Anyway, this is what you need. Hope it helps, http://rocksbarbque.com/product.gc?ID=18 Joe PS I don't have a Stoker though so maybe I don't know what the hell I'm talking about
LarryR Posted January 23, 2010 Author Report Posted January 23, 2010 Thought I'd Read . . . I thought I'd read you need to install a "tube" from BBQ Guru. Will the Stoker adapter "plug" directly into the KK using the standard adapter from Rocks? I have the part you reference in your link, it's the part on the left hand side of my picture, just doesn't have the fan connected in the picture.
Loquitur Posted January 23, 2010 Report Posted January 23, 2010 Hi Larry: You are showing the part that is the issue - it just has to be the right size depending on what KK you have, and you buy it from Rock's. If your KK came with a factory installed ATC port, you need the "new" faceplate adapter, a/k/a guru sized faceplate adapter. The only difference between the new and old faceplates is that the new one is slightly smaller in diameter than the old one, and it fits perfectly in the factory installed port which was designed in size for a Guru. I know this because I happen to have both faceplates. All you need to do is screw it on your fan. Susan
LarryR Posted January 23, 2010 Author Report Posted January 23, 2010 Cleared-up Spoke with Dennis, he reports the Guru tube is now built into the KK so I'm good. Thanks for your replies.
LarryR Posted January 24, 2010 Author Report Posted January 24, 2010 One more question - Plug What do most use to "plug" your port when not using an ATC device?
bryan Posted January 24, 2010 Report Posted January 24, 2010 Go here http://www.komodokamado.com/forum/viewt ... t=silicone
jdbower Posted January 24, 2010 Report Posted January 24, 2010 I used to use a balled up bit of aluminum foil as a plug. You can also just use the blower itself - Stoker blowers have a flap that prevents a lot of airflow when the blower is off. I now use a large silicone stopper, but there's a custom one from BBQ Guru that will fit the newer models if you've got the Guru-sized adapter.
