Poochie Posted September 12, 2015 Report Share Posted September 12, 2015 If you have the teak shelves and one end of them wants to touch the side of the Komodo, you have a slight adjustment you can do. Grab a socket set to do this the easy way. 1. Turn the shelf upside down so you can see the 4 bolts underneath 2. Loosen these bolts just enough so you can wiggle the shelf. A half turn will probably do it. 3. Mount the shelf on the Komodo 4. Move/wiggle the shelf to where the spacing is equal all the way around the Komodo...or as close as you can get it to equal. 5. Crawl, stoop, crouch so you can get to those same 4 bolts from underneath the shelf 6. Tighten the bolts and you're good to go. I had one end of my shelf rubbing on the Komodo when I'd remove it and put it back on. This cured it. Quote Link to comment Share on other sites More sharing options...
tinyfish Posted September 12, 2015 Report Share Posted September 12, 2015 Thats always good to know. Quote Link to comment Share on other sites More sharing options...
