Chris Young's Giant Grill Gauge, Combustion Engine, and Predictive Thermometer

[David Chang]

This setup replaces the dome thermometer (magnetic and removeable), the blower fan (now rechargeable and wireless), and wireless probes (900F limit).

If getting the bundle, an extra thermometer, and port adapter, you're looking at a wireless setup in excess of over $600 USD. 

 

https://combustion.inc/pages/giant-grill-gauge

 

 

 

 

 

[wrandyr]

It is not clear to me if the GGG temperature sensor probe is long enough to work with a KK. Chris indicated that they would be posting dimensional drawings a while ago, but it hasn't happened.

[David Chang]

14 hours ago, wrandyr said:

It is not clear to me if the GGG temperature sensor probe is long enough to work with a KK. Chris indicated that they would be posting dimensional drawings a while ago, but it hasn't happened.

some info from reddit

[wrandyr]

What is not clear to me is how far the sensor would reach into the KK. Chris was surprised by the thickness I measured on mine. I wouldn't think having it just barely peeking through the hole would be ideal.

[David Chang]

i see, your concern is because our tel tru is extremely long-stemmed. i was thinking of the stem diameter.

i dunno, someone needs to spend the $$$ and report back to us..

[David Chang]

their customer service got back to me on my questions. 

"The sensor tube for the GGG is 4mm x 86mm (0.16 x 3.39”)"

 

this is a very short thermometer stem compared to the 5 inch tel-tru on the kk..

 

[wrandyr]

Based on what they have published so far, I estimated only 6mm or so of the probe would extend into a KK.

I don't think they ever did the tweak Chris mentioned.

[David Chang]

if by tweaking, then making a longer stem just to satisfy 4 or 5 curious kk users will probably never happen…