Any other rotisserie motors other than EZ Que?

[cruzmisl]

HI All,

I need a new rotiserrie motor for my EZ Que and was curious if there are other options available? It seems they are charging a lot of money for a roti motor. I think I'm going to go with an AC motor for a bit more power. Having said that I don't want garbage either but I'm thinking the EZ Que may be proprietary with Dennis' design.

Thanks,

Joe

[Firemonkey]

I dont have the rotis, but I think they are fairly standard. I recall DrunkJ telling me (maybe even posting about) using an old Wal-Mart motor for a while.

Why not just go down to Lowes or Home Depot and get a motor, if it doesnt fit, you can return it.

[DennisLinkletter]

Motors..

From looking at the photos of motors online only, it seems that the mounting bracket and drive socket are pretty standardized.

[cruzmisl]

Thanks for the replies. I already have the EZ Que. THe AC pin is all green and doesn't work anymore and the screws that hold it together are seized and I can't get it apart to replace it. I'll see what I can find at the big boxes and post when I know something.

[primeats]

I swapped out the rotis motor from my gasser, it works pretty good,you just have to make sure that the holes are aligned so the shaft will spin properly

[U2PLT]

EZ-Que

They have a motor that has "302" as model #. It is 50# rated, is SS, and rotates counter clockwise so that it is not trying to unfasten from the bolt holders. It runs a little slower because of its 50# rating. I have one and has worked great. It will fit all the KK fittings. All though more costly it SS and has nice capacity. You can fit two 14 # turkeys on the 8" basket and this motor handles it with no problem, I have done it.