rorkin Posted December 7, 2006 Report Posted December 7, 2006 RE: Guru Plug.. The refractory plug is soft and chips out.. It is a plug but does not seem to "pop" out in one piece. Use a Philips head screw driver and tap/ chip away from the outside in.. I don't think the drilling is necessary but cant hurt. You can pretty easily drive the screw driver through the plug. This worked fine for me
Jim Malter Posted December 13, 2006 Report Posted December 13, 2006 I found the plug easy to push in with a phillips and light tapping. I could not get the guru tube in, though. I reversed (went in from the inside). The plate on the KK outside was a little off, blocking the tube. I filed down the plate from the outside and got the tube thru. The guru is a good match with the KK. It barely had to run to keep the cooker at 225. Jim
DennisLinkletter Posted December 13, 2006 Report Posted December 13, 2006 Guru port plug The newest plugs actually have a small wad of paper inside so they will implode and fall apart..
