cavedweller Posted September 26, 2021 Report Posted September 26, 2021 23 ultimate First rotisserie - two large chickens stuffed with vegetables and a conenchua sausage on the outside - wondering about the smoke coming coming from hole on right side below lid? What is this holes purpose?
cavedweller Posted September 26, 2021 Author Report Posted September 26, 2021 I figured the connecha will add some sweet heat to the golden brown chicken skin basted with worshteshire and butter with a we bit of soy and secret sauce. 1
Basher Posted September 26, 2021 Report Posted September 26, 2021 Cavedweller you will have some black rubber plugs for that hole.It’s for putting temperature probe cables into the KK.How did the birds turn out?Sent from my iPhone using Tapatalk
cavedweller Posted September 26, 2021 Author Report Posted September 26, 2021 Good to know - now I need to find a kk plug anyone have a link ?
jeffshoaf Posted September 26, 2021 Report Posted September 26, 2021 https://komodokamado.com/collections/21-supreme-spare-parts/products/polder-tube-silicone-plugs-6pcs 1
cavedweller Posted September 27, 2021 Author Report Posted September 27, 2021 2 hours ago, jeffshoaf said: https://komodokamado.com/collections/21-supreme-spare-parts/products/polder-tube-silicone-plugs-6pcs Good to know - now I need to find a kk plug anyone have a link ?
cavedweller Posted September 27, 2021 Author Report Posted September 27, 2021 Winner winner chicken dinner 🥘 All good accept I didn’t leave enough space on rotisserie inserts into KK so as things expanded with heat I couldn’t get it out and used the Allen key to release basket prongs. Lesson learned 😏
jeffshoaf Posted September 27, 2021 Report Posted September 27, 2021 16 minutes ago, cavedweller said: Good to know - now I need to find a kk plug anyone have a link ? Those are the plugs you're looking for - the first really popular cabled remote probe-type thermometer was made by Polder so it used to be used as a generic name for that type of thermometer. Those plugs will fit the KK port that's leaking smoke in your pics. 1
Basher Posted September 27, 2021 Report Posted September 27, 2021 Cavedweller while waiting for your plug, roll up some paper tight and plug the holes with this.Sent from my iPhone using Tapatalk 1
tony b Posted September 27, 2021 Report Posted September 27, 2021 You should have a bag of "spare plugs" in your repair kit that came with your KK. Yep, I've had troubles in the past with the rotisserie expanding and being difficult to remove once the cook is finished - a PITA sometimes. I trimmed my rotisserie rod down and one of the end pieces on the basket, too. One piece of advice, as I made this mistake - the pointy end on the rod unscrews and you should remove it after skewering your food, which shortens the rod about 1/4". It will help with the expansion issue, without trimming. Now, I have to leave the pointy end on, otherwise the rod is too short to reach the holes inside the KK. Doesn't make for the best fit. 1
cavedweller Posted September 28, 2021 Author Report Posted September 28, 2021 On 9/26/2021 at 4:05 PM, Basher said: Cavedweller you will have some black rubber plugs for that hole. It’s for putting temperature probe cables into the KK. How did the birds turn out? Sent from my iPhone using Tapatalk The birds were quite succulent very moist! I pulled at 160 and covered - they finished sitting at 168 degrees. I didn’t baste them as intended so the skin never got brown sugar brown. Guests were happy.
cavedweller Posted September 28, 2021 Author Report Posted September 28, 2021 16 hours ago, tony b said: You should have a bag of "spare plugs" in your repair kit that came with your KK. Yep, I've had troubles in the past with the rotisserie expanding and being difficult to remove once the cook is finished - a PITA sometimes. I trimmed my rotisserie rod down and one of the end pieces on the basket, too. One piece of advice, as I made this mistake - the pointy end on the rod unscrews and you should remove it after skewering your food, which shortens the rod about 1/4". It will help with the expansion issue, without trimming. Now, I have to leave the pointy end on, otherwise the rod is too short to reach the holes inside the KK. Doesn't make for the best fit. I used the large basket for this cook. But that’s really good info! 1
cavedweller Posted October 16, 2021 Author Report Posted October 16, 2021 On 9/26/2021 at 4:05 PM, Basher said: Cavedweller you will have some black rubber plugs for that hole. It’s for putting temperature probe cables into the KK. How did the birds turn out? Sent from my iPhone using Tapatalk The birds were roasting hens.... quite large as chickens go. I cooked them at 300 degrees F. The meat was succulent, very moist, and I removed them a few degrees below rec. cooking temp and covered tightly to allow them to finish off the KK. I have since learned my lack of a crispy skin and golden color were the result of insufficient KK temp. Oh well. I figured since roasting hens were fatter, it would be wise to cook slower to render most of the fat out. Lesson learned. BUT i also learned something else by accident. The Connecha sausage fell out of the rotisserie directly into the glowing coals; must of sat it the embers for at least 5 minutes. Low and behold, i found myself and my guests ranting about the flavor and texture of the Connecha! Like a reverse seared steak i guess. I will be using this technique again and again in the future. 4
