wineman Posted May 1 Report Posted May 1 Does anyone have a preferred rotisserie option among those listed on the KK website (Cradle with Reducers vs. Spit with center and outside forks)? I don't plan on using the rotisserie for anything larger than a 16 lb. turkey. Also: Does anyone know the distance from the KK unit and the rotisserie motor installation plates, when bolted onto the KK? I'll be placing the 32" Big Bad in a cutout within a stone/concrete housing unit and need to know how much additional room to allow across the width of the cutout to allow for the OneGrill Heavy Duty rotisserie motor (5 1/2") PLUS the distance from the motor to the KK (???"). Thanks!
tony b Posted May 1 Report Posted May 1 The only one that I don't use anymore is the OctoForks. I always manage to cut myself when using them, so they're banished. I have the KK cradle/basket, spit rod with a flat basket (adjustable thickness) and regular spit forks. Sorry, I don't have a 32" KK, so I'm no help about the measurement question. If no other 32 owners answer, there's always Dennis!
C6Bill Posted May 1 Report Posted May 1 i can throw mine on and measure, i know someone asked this and answered as they were doing the same but i couldn't find it searching
tekobo Posted May 2 Report Posted May 2 I use my spit and fork more often and I bought an extra set of double ended forks so that I could spin 3 chickens at a time in my 32. The cradle is more unwieldy but does help with larger joints and I would probably recommend it over a spit and fork for something as large as a turkey. That said, I have never spun a turkey and don't even like the stuff so I am not a good judge! I am away from home without access to my 32 so sadly cannot answer your question about dimensions.
C6Bill Posted May 2 Report Posted May 2 (edited) Sorry for the delay, hope this helps. And you would want to leave some extra room just for wiggling it in place. Edited May 2 by C6Bill 4
