DennisLinkletter Posted October 24, 2006 Author Report Posted October 24, 2006 something like a drawer.. The only drawback is with doors already out there. -=Jasen=- Actually existing doors could be updated as the guide roods/rails are bolted with mini bolts to the door and the screen drawer could be attached using these 4 mini bolts also. Just a side note.. it is uncommon to have burning embers roll out on their own.. It takes the right combination of ash mountain and small burning bounce to have one travel that far to the edge.. This is something that might happen when your poking around in the coals..
greggd Posted October 24, 2006 Report Posted October 24, 2006 door Dennis: I have only been on this board a brief time. Nonetheless, I think your "life hands you lemons, ask for tequila and salt" saying is incorrect. I think your tag line should be "when life hands you lemons, redesign and make the lemon more user friendly" Gregg
Fetzervalve Posted October 24, 2006 Report Posted October 24, 2006 I will have the low air flow and gas combined and will not remove it ... -=Jasen=- What do you mean - low air flow and gas combined?
DennisLinkletter Posted October 24, 2006 Author Report Posted October 24, 2006 Re: door Dennis: I have only been on this board a brief time. Nonetheless, I think your "life hands you lemons, ask for tequila and salt" saying is incorrect. I think your tag line should be "when life hands you lemons, redesign and make the lemon more user friendly" Gregg Thanks for the Kudos..
ThreeDJ16 Posted October 25, 2006 Report Posted October 25, 2006 I will have the low air flow and gas combined and will not remove it ... -=Jasen=- What do you mean - low air flow and gas combined? Read through the the couple of pages on this thread! http://www.komodokamado.com/forum/viewt ... c&start=15 -=Jasen=-
ThreeDJ16 Posted October 25, 2006 Report Posted October 25, 2006 Just a side note.. it is uncommon to have burning embers roll out on their own.. It takes the right combination of ash mountain and small burning bounce to have one travel that far to the edge.. This is something that might happen when your poking around in the coals.. Oh yeah, I agree that this would not seem to be a normal occurrence. I think it is great you take your customers safety so serious you are going out of your way to make a safety improvement. I mean look at Weber grills; that flimsy little tray under those things are pathetic. If I called them they would be laughing and would probably not give a rip. This area could also fall into the customer responsibility as no flame generating device is really recommended on wooden surface without adequate protection (a grill mat could have helped or definitely tiles laid on top of the wood), but instead of doing tossing that back; you are out to make your grill better. So I applaud that! Just for info, I also had another very simple idea that would be even easier and cheaper. A small, solid clip in door that just gives you a bottom lip. Simple to clip in and leave in, or take out for ash removal. -=Jasen=- Gotta love these mad drawing skills - hahahaha!
Sanny Posted October 25, 2006 Report Posted October 25, 2006 Gotta love these mad drawing skills - hahahaha! Jasen, hunny... Just how many of those little pain pills did you take today? Step away from the crayon box, punkin... It's for your own good.
ThreeDJ16 Posted October 25, 2006 Report Posted October 25, 2006 Gotta love these mad drawing skills - hahahaha! Jasen' date=' hunny... Just how many of those little pills did you take today? Step away from the crayon box, punkin... It's for your own good. [/quote'] What can I say, I am really, really bored. I can only watch so much TV and video games - hehehe. But 3 pills so far - hehehe - feeling very little pain! -=Jasen=-
Sanny Posted October 25, 2006 Report Posted October 25, 2006 What can I say, I am really, really bored. I can only watch so much TV and video games - hehehe. But 3 pills so far - hehehe - feeling very little pain! -=Jasen=- Pat pat. Yah. And TV will suck the brain right out of your head. You're smarter on the pain pills than you would be after a day of TV.
ThreeDJ16 Posted October 25, 2006 Report Posted October 25, 2006 What can I say, I am really, really bored. I can only watch so much TV and video games - hehehe. But 3 pills so far - hehehe - feeling very little pain! -=Jasen=- Pat pat. Yah. And TV will suck the brain right out of your head. You're smarter on the pain pills than you would be after a day of TV. Either way, it probably ain't saying much for me - hehehe (figured I would be the other guys to that one)! -=Jasen=-
rorkin Posted November 12, 2006 Report Posted November 12, 2006 A little off topic but what ever happined to the screen for the bottom damper to prevent hot coals from rolling out.. So far this problem has started a real life fire --documented here I think it should move to the top of the availability list. Once again.. if it is available it is a secret on how to get.
Sanny Posted November 12, 2006 Report Posted November 12, 2006 A little off topic but what ever happined to the screen for the bottom damper to prevent hot coals from rolling out.. So far this problem has started a real life fire --documented here I think it should move to the top of the availability list. Once again.. if it is available it is a secret on how to get. Here's the thread. http://www.komodokamado.com/forum/viewt ... creenLooks like design got pretty close to finished. Why not PM Dennis and ask about it?
DennisLinkletter Posted November 16, 2006 Author Report Posted November 16, 2006 20 are being made up 20 are being made up.. It took a while to source the stainless screen material but the now have it. They are free of charge to all KK customers.. I will eventually contact all customers and send them these but the forum family will be first to receive them..
rorkin Posted November 16, 2006 Report Posted November 16, 2006 Thats great. Dennis you are the best !!!!
Porkchop Posted November 16, 2006 Report Posted November 16, 2006 dennis - please don't go to the expense in my case; you've done plenty! besides, larry currently resides on a concrete slab. last i checked, they don't combust all that easily as always, impressed by your dedication to innovation and customer service!
Fetzervalve Posted November 16, 2006 Report Posted November 16, 2006 Maybe you can send it with my grill scraper??!?!?
Curly Posted November 16, 2006 Report Posted November 16, 2006 Maybe you can send it with my grill scraper??!?!? The metal bristled (brass maybe, I don't know) grill brushes at walmart at about $.50 or $1.00 work for a long long time. I have a grill scraper that I don't use
Porkchop Posted November 16, 2006 Report Posted November 16, 2006 does dennis make a grill scraper? i got one on sale at meeee-nards for a buck, and it is a dual purpose. about a 18" handle with an ash scraper/grill scraper head. easy as pie! btw, that's one of the things i like about his design; the lower draft being flush with the bottom of the cooker makes it much easier to scrape out all the ash!
Curly Posted November 16, 2006 Report Posted November 16, 2006 does dennis make a grill scraper? i got one on sale at meeee-nards for a buck, and it is a dual purpose. about a 18" handle with an ash scraper/grill scraper head. easy as pie! btw, that's one of the things i like about his design; the lower draft being flush with the bottom of the cooker makes it much easier to scrape out all the ash! Combined with the screen (for those of us in log homes) it is definately a winner. Especially considering how hard in was on the other brand...GIVEN THAT YOU WERE NOT ALLOWED to remove the firebox I looked everywhere and still couldn't find where it said not to remove the firebox cause it was already cracked and would self-destruct upon any slight movement. Oh well, I digress
DennisLinkletter Posted November 16, 2006 Author Report Posted November 16, 2006 You mean these grill scrapers? Maybe you can send it with my grill scraper??!?!? You mean these grill scrapers? I had some L shaped brass fittings machined up that turned the gas nipple downwards.. They came out terribly and needed to be redone. That and needing to get to 50 kilos to get a commercial rate has delayed this latest shipment to Tony.. Hopefully tomorrow..
