ThreeDJ16

Hehe Can I borrow that from you this weekend? -=Jasen=-

Ok, I am curious if anyone here has any suggestions for me to get a K into the back of a small pickup truck? I do not have a ramp, nor do I have a low spot? Dead lifting is not an option for me (I have some back issues - not to mention it's freakn heavy). Any help would be appreciated! -=Jasen=-

Hello! I was just curious about the lift spring. I know it is user adjustable and is probably part of routine maintenance to have to adjust it once in a while. Being the spring is constantly under a load, I was wondering if the spring has to be replaced eventually? Thanks, -=Jasen=-

?? Hey Tony, is the PM thing working? I have sent you a couple of PMs and I was just wondering if it worked or not? -=Jasen=-

?? Still looking but this (http://www.hsiang-i.com/hsiang/product/images/p017-l.jpg) is a starting point. With this valve you could thread in whatever type fitting you need. My preference was one that looked like that one with 3/8 flare (I think that is the stardard size - need to go check that) inlet to 1/4 (or whatever is needed for your burner) outlet. -=Jasen=- Actually, I just found this and like it slightly better - http://www.hsiang-i.com/hsiang/product/images/p016-l.jpg

?? It would help me in finding the valve if I had a close up pic. I am trying to see if the valve contains the jet orfice or if they are seperate and thread together? Type and length of threading needed to connect together and to burner. Also trying to find one with flare gas in connection instead of the barb (seems to be the standard for all outdoor burners connections - or at least all that I have or have ever seen). It is always fun trying to sift through online manufacturers catalogs - I might wait till I get to work where I have access to books instead. -=Jasen=-

?? Ok, same thing. I click on add image to post, the upload window opens, I select a .jpg under 2 meg, it show upload progress, then the window just goes blank. I wonder if maybe some security feature is preventing this or some scripting app is not installed? The postimage.org website does not seem to have any FAQ or troubleshooting - argh! -=Jasen=-

Hmm? So where is the option "click for a larger pic"? I am not used to how things work in this forum yet. I need to find that FAQ thing again I guess - hehe. -=Jasen=-

Ah-hah! I see the bolts for the side table in one of the photos Dennis put up in this thread. This had me thinking, I know it would be really hard to tile a side table that matched the outside KK contours (even though that would be prefered), but how about stainless side tables? They could easily be cut in an eye pleasing shape, mounted to those bolts and even be easier to clean! Just a thought! -=Jasen=-

I really like your design on the burner as far as keeping the venturi inlet inside the door. That way air cannot get pulled through it after the flame is extinguished and the door is closed. Now, what I am wondering if you will be able to do for me is add your "low airflow control feature" to the door. Somehow if that could be incorporated into the same space at the gas in jet (maybe use the valve stem as the center post for the damper to spin on)? I can visualize it, but not really describe it well. I also want to do away with the pilot (I have a long striker stick) and get a single valve (which the knob faces straight out and gas attach faces down). I think that is the one thing the K gas attachment did right is a valve that made the gas feature not so ugly to leave installed. The only reason I bring this item up is I really like have the gas start and leaving it attached always. I hate the idea of swapping doors and having to leave one laying around. Before I will do that, I believe I will get the flame throwing weed burner. This is also the only item on the grill so far, I do not like the look of - nothing negative meant - just my opinion. So I am hoping this can be an option for me? I would be willing to help find the right valve. -=Jasen=-

Hmm? I guess I should not have laughed at you as I am having trouble trying to post an image from my PC hard drive. I clicked on the "Add image to post" button and uploaded it; then it just did nothing? So what am I doing wrong here - besides drinking Sangria? -=Jasen=-

!!!!! My photo viewing program has the ability to resize. I am using ACDSee 6.0. -=Jasen=-

Hmm? Well, I thought I had recieved all of the emails from people I had asked at Ebay; but I am still getting in email of praise. Which is good as far as I am concerned. -=Jasen=-

Nice Cabin. Forgot to mention earlier - very nice place Curly. -=Jasen=-

Ok, So I am wrong about the post counter! Ok, So I am wrong about the post counter! It is just odd that it goes back and changes the count number in previous posts - but I guess that is normal. But hey, I can admit I was wrong (Uh-hmm). -=Jasen=-

Hehe! Hehe, wouldn't that really be nice - huh? Actually, I think the count is based on new topic posts. -=Jasen=-

Here a Pic? Here a pic, there a pic, everywhere a pic, pic? -=Jasen=-

We are not laughing with you, we're laughing at you! We are not laughing with you, we're laughing at you! -=Jasen=-

Mmmm! Mmmm, pork butt, sounds good. I'll be over for lunch tomorrow! Actually you got me thinking about going and picking up a shoulder or boston butt. -=Jasen=-

It's Cool! That's why!! Reason?? It's cool factor is reason enough for me - hehe! Doesn't hurt that it is improved in about a dozen areas either! -=Jasen=-

?? Hello! Do you think the top really really needs to be hinged and be able to open? I was just thinking that could save a good bit on expense and time to make. I cannot say that I would ever need the upper rack to be hinged (unless the grill sits way below the lip - I am not sure as I have not really seen a pic). -=Jasen=-

You suck - you know that right? -=Jasen=-

Well, I am hoping the close proximity of Atlanta and Columbia help there. I have not heard of another K in Augusta, but there could be. I sold a Traeger grill here and got $750 for it (I was really happy with that). Yeah, I think Curly's price is slightly off unfortunately as the sale of $899 already includes the stainless bands, stainless main grill, stainless thermomter and ceramic cart. Basing it on the sale price, I come up with $1476 plus shipping now verses the $1700 during no sale times. I guess I need to wait till the sale ends - hehe. -=Jasen=-

Hmm Actually it shows up the correct time for me minus the daylight savings adjustment. Do you have your time zone set up in your profile for GMT-5 hours for EST? Not really sure why it does not give you the option to adjust for DST though. Oh yeah, Gerard - just keep telling yourself that and one day it may become true - hehe - and who is drunk now? -=Jasen=-

?? Damn, you have all that too and your selling it for $800?? How old is yours? Man, your killing me, I just can't let mine go for that. -=Jasen=-