Cheesehead_Griller Posted April 8, 2022 Report Share Posted April 8, 2022 Does anyone know what the small screw is for? Oh, and what are these for? Looks like they fit in the side table holes. Quote Link to comment Share on other sites More sharing options...
tony b Posted April 8, 2022 Report Share Posted April 8, 2022 I don't have side tables on mine, so I can't help with that 1st question. The last picture is the grate rack. I have one on mine, but rarely use it as storing the larger grates on it prevents the cover from going on. I'd rather have the cover than the rack. I have another space to store those. I guess you could also use it to hang utensils on? But, again, I have a rack on the end of my deck table for those. Quote Link to comment Share on other sites More sharing options...
Franck Posted April 8, 2022 Report Share Posted April 8, 2022 Do not quote me on either of the answers but, my guess is that the little bolt is to adjust the inclination of the table since the surface isn't exactly 90º vertical. You'll notice that your side table will not be level if you tighten the other three bolts and remove the small one. As for the second picture, it is more of a hanger for tools rather than grate because it moves freely. I tried putting a grate on it and had a difficult time getting it off because it would move upward as well... Hope that helps 1 Quote Link to comment Share on other sites More sharing options...
Cheesehead_Griller Posted April 8, 2022 Author Report Share Posted April 8, 2022 Got it! Quote Link to comment Share on other sites More sharing options...
C6Bill Posted April 8, 2022 Report Share Posted April 8, 2022 A friend told me that Dennis probably included that screw in my order cause he could tell I had a screw loose. I think she made that up but what do I know 🥸 3 Quote Link to comment Share on other sites More sharing options...
Poochie Posted April 9, 2022 Report Share Posted April 9, 2022 You have it on correctly, Cheesehead_Griller. I don't know what that smaller screw is for. Quote Link to comment Share on other sites More sharing options...
Cheesehead_Griller Posted April 13, 2022 Author Report Share Posted April 13, 2022 On 4/9/2022 at 6:43 AM, Poochie said: You have it on correctly, Cheesehead_Griller. I don't know what that smaller screw is for. Expand Dennis said to finger tighten the top screws then use the bottom smaller screw to "level" the table. 2 Quote Link to comment Share on other sites More sharing options...