Wingman505 Posted May 30, 2020 Report Share Posted May 30, 2020 (edited) I recently adjusted my spring as the lid wasn’t opening quite the way it was when first delivered. I needed to slightly adjust it again today to get it right where I want it. I decided to lubricate the hinge and spray a little creeping lubricant into the hinge pivot point. I then opened and closed the lid a few times and I quickly realized that I added too much tension to the spring. It was opening faster and harder than I’d like, so I readjusted the spring and removed a little tension. The moral of the story is we should lubricate our hinges on occasion as part of our routine maintenance. My spray lubricant of choice is Boeshield T-9. It’s amazing stuff. If you haven’t used it before, give it a try. I’ve been using it for years on my 5th wheel in a multitude of places including hinge and latch mechanisms, etc. It worked wonders on Cronos’ hinge. 😊. It dissolves corrosion, displaces water, and leaves a thin, waterproof lubricating film. We’re making pizza tonight. I hope you all are enjoying your weekend! Edited May 30, 2020 by Wingman505 4 2 Quote Link to comment Share on other sites More sharing options...
Tyrus Posted May 31, 2020 Report Share Posted May 31, 2020 (edited) Made me think that I've never added any oil to my hinge however the hinge adjustment was done only once when I first received my KK and still performs outstanding. Don't have the T-9 but I do have some clock oil, reminds me of Tin Man...hoping my KK doesn't start talking and roll away on me. Edited May 31, 2020 by Tyrus 2 1 Quote Link to comment Share on other sites More sharing options...
jonj Posted May 31, 2020 Report Share Posted May 31, 2020 I use Boeshield T-9 mainly for rust prevention on hand tools and woodworking power tool steel tops (cabinet saw, jointer, planer, etc). It does do a good job as a lubricant as well. I hadn't thought of lubricating the KK hinge. Good tip. 1 1 Quote Link to comment Share on other sites More sharing options...
mguerra Posted June 1, 2020 Report Share Posted June 1, 2020 If you do any construction, repair or maintenance work at all, you need a can of Boeshield at hand. As well, a can of Kano Aerokroil, which is a creeping lube/ bolt loosener. Eh, I guess some WD-40 also. But it's pretty much obviated by the other two. 2 Quote Link to comment Share on other sites More sharing options...
Paul Posted June 1, 2020 Report Share Posted June 1, 2020 1 hour ago, mguerra said: Kano Aerokroil Kroil is the bomb! Never heard of Boeshield...have to look for some and give it a try. 1 Quote Link to comment Share on other sites More sharing options...
Wingman505 Posted June 1, 2020 Author Report Share Posted June 1, 2020 51 minutes ago, Paul said: Kroil is the bomb! Never heard of Boeshield...have to look for some and give it a try. I agree with both of you. Kroil does wonders... Especially frozen fasteners. 1 Quote Link to comment Share on other sites More sharing options...
Jon B. Posted June 1, 2020 Report Share Posted June 1, 2020 Never heard of Boeshield either?? Need to check it out. My go to is Fluid Film. Wonderful stuff!! 2 Quote Link to comment Share on other sites More sharing options...
mguerra Posted June 2, 2020 Report Share Posted June 2, 2020 From Amazon: Boeshield T-9 was developed and licensed by global aerospace leader, The Boeing Company, to fill a need for high-performance, long-term metal protection and lubrication. T-9's rust preventative spray uses a unique formulation of solvent carrier and paraffin wax coating engineered to penetrate crevices deeply, displace moisture, dissolve minor corrosion, and leave a clean, waxy coating with lasting durability-without using Teflon, silicone, fluorocarbons, MEK, or acetone. Whether it be automotive, bicycle, industrial, lawn and garden, marine, RV or tools, T-9 continues to be the best option for rust prevention and waterproof lubrication. 4 Quote Link to comment Share on other sites More sharing options...
Jon B. Posted June 2, 2020 Report Share Posted June 2, 2020 Thanks for the Boeshield Information. Going to order some and check it out. Being a boater....everything I own gets rusty/corroded/pitted/etc. I have had great results with the fluid film on steel, aluminum, battery terminals, trailer hitches, locks, stainless steel, etc. Besides the fact that it works well, it has no explosive solvents. Important when used in the bilge/engine area. It was developed for the marine and off shore drilling environments. FLUID FILM® is formulated from specially processed wool-wax, highly refined petroleum oils and selected agents to provide corrosion control, penetration, metal wetting and water displacement. These long lasting products contain no solvents, will not dry out and will penetrate to the base of all metals, providing corrosion protection from both natural and industrial atmospheres. Heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. that would normally be damaged during maintenance, can be salvaged by applying FLUID FILM®. Check out this interesting test..... Going to check out the T-9 product but this is a great product also. FYI 3 Quote Link to comment Share on other sites More sharing options...