Aussie Ora Posted November 23, 2016 Report Posted November 23, 2016 Definitely a fun challenge for sureSent from my SM-P600 using Tapatalk
FotonDrv Posted November 23, 2016 Author Report Posted November 23, 2016 10 hours ago, billg71 said: Sorry, didn't realize you were going that far. I was looking at your picture and thought you were going to the area below and to the left of the garage. And the roof would definitely be a problem! Good luck and post some pictures! Best, Bill Not a problem at all so no apologies necessary I found a place in the county about 30 miles away that has these to rent and it would get it from the street, down the steep slop and inside my garage!! Yahoo, it is just $$ and you can't take that with you. I have operated these things before and they are real slick. We pulled my 725 pound planer and my 610 pound table saw out of the back of a 24ft U-Haul truch and extended them through the door of my shop; talk about a painless maneuver! All I will have to do is roll KK down the 32 degree slope of the stairway 8ft onto the cement patio. Yeah,, mission almost accomplished. I cut all the pieces today to clad those stairs with 1-1/8" plywood so it should be smooth rolling.
tinyfish Posted November 24, 2016 Report Posted November 24, 2016 One step closer and a little easier. 1
Bruce Pearson Posted November 24, 2016 Report Posted November 24, 2016 I hope all goes well with your move this sounds interesting. Please take plenty of pictures happy Thanksgiving to everybodyhappy Thanksgiving to everybody
FotonDrv Posted November 24, 2016 Author Report Posted November 24, 2016 2 hours ago, Bruce Pearson said: I hope all goes well with your move this sounds interesting. Please take plenty of pictures happy Thanksgiving to everybodyhappy Thanksgiving to everybody And a Happy Thanksgiving to you and everybody on the KK team as well! The suggestion of heavy equipment wins, partially at least and then it is up to muscle and ingenuity to get it down the stairway.
mguerra Posted December 9, 2016 Report Posted December 9, 2016 Well, how did it go? I would have just left it out in the driveway, built an ODK around it, and called it yard art!
jonj Posted December 9, 2016 Report Posted December 9, 2016 See the topic "The Bear Cometh" for an excellent refresher on basic mechanical principles. A superior job. 1
FotonDrv Posted December 9, 2016 Author Report Posted December 9, 2016 (edited) It went well! Go to the Thread "The Bear Cometh" and all the photos and explanations are there. Edited December 9, 2016 by FotonDrv adding a link to aim you
