Aussie Ora Posted March 9, 2017 Report Share Posted March 9, 2017 So in all the excitement of selling my kj well it was not that exciting lol but I gave them the joetisserie hence the motor I was using has gone look out .I just ordered this should work fine I was looking at 10 kg but thought why not get a bit more the specks say it draws 15 watts but the chick in the video says 12.5 lol https://www.bbqspitrotisseries.com.au/stainless-steel-bbq-spit-rotisserie-240v-motor-20kg Outback Kamado Bar and Grill 1 Quote Link to comment Share on other sites More sharing options...
Stile88 Posted March 9, 2017 Report Share Posted March 9, 2017 That should do the trick Aussie 1 Quote Link to comment Share on other sites More sharing options...
MacKenzie Posted March 9, 2017 Report Share Posted March 9, 2017 It has a nice 24 month guarantee. 1 Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 9, 2017 Author Report Share Posted March 9, 2017 It's a good warranty most things you buy in Australia are guaranteed for 12 months under consumer law so no dramas there plus we have product disclosure laws and when you advertise a price it should be in full including any additional costs drip selling does not go down well here. For example, we have a 10% GST which must be included in the listed price so you know what you are paying at the till .always spins me out how the states list a price and then adds taxes on at the till lol anyway rant over can't wait to get spinning lol Outback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
tony b Posted March 9, 2017 Report Share Posted March 9, 2017 8 hours ago, Aussie Ora said: always spins me out how the states list a price and then adds taxes on at the till lol You've obviously seen a cell phone bill here in the States! LOL Fees and taxes - one on top of the other. https://www.ispot.tv/ad/Ahxr/t-mobile-one-lemonade-stand 4 Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 9, 2017 Author Report Share Posted March 9, 2017 You've obviously seen a cell phone bill here in the States! LOL Fees and taxes - one on top of the other. https://www.ispot.tv/ad/Ahxr/t-mobile-one-lemonade-stand Lol Outback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
churchi Posted March 11, 2017 Report Share Posted March 11, 2017 On 3/9/2017 at 10:26 PM, Aussie Ora said: So in all the excitement of selling my kj well it was not that exciting lol but I gave them the joetisserie hence the motor I was using has gone look out .I just ordered this should work fine I was looking at 10 kg but thought why not get a bit more the specks say it draws 15 watts but the chick in the video says 12.5 lol https://www.bbqspitrotisseries.com.au/stainless-steel-bbq-spit-rotisserie-240v-motor-20kg Outback Kamado Bar and Grill Thats the one i have mate. Got it from the same place. It does wind the other way compared to overseas motors, so on the basket, it was unwinding the thread. I will have to get Dennis to send me the solid bar attachment so it doesn't unwind the thread in my next order. I have had no issues with it. Its pretty solid. Good warranty and spins quite a bit of kgs. Ive got purchased quite a bit of stuff from those guys and never a problem. 1 Quote Link to comment Share on other sites More sharing options...
ckreef Posted March 11, 2017 Report Share Posted March 11, 2017 It's irrelevant which way it spins. One side or the other is always going to want to unwind. Blue loc-tite wrenched down with a 24 hour cure time solves the problem. Of course the new pinned pieces from Dennis solves it better. 1 Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 11, 2017 Author Report Share Posted March 11, 2017 Thats the one i have mate. Got it from the same place. It does wind the other way compared to overseas motors, so on the basket, it was unwinding the thread. I will have to get Dennis to send me the solid bar attachment so it doesn't unwind the thread in my next order. I have had no issues with it. Its pretty solid. Good warranty and spins quite a bit of kgs. Ive got purchased quite a bit of stuff from those guys and never a problem. Great to hear love a good review after I purchased something lol I thought 20 kg would be the go rather than the 10 doubt I will spin anything over 10 but you never knowOutback Kamado Bar and Grill 1 Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 11, 2017 Author Report Share Posted March 11, 2017 It's irrelevant which way it spins. One side or the other is always going to want to unwind. Blue loc-tite wrenched down with a 24 hour cure time solves the problem. Of course the new pinned pieces from Dennis solves it better. I like the second optionOutback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 11, 2017 Author Report Share Posted March 11, 2017 Hey churchi it's 1.7 kg in weight the bracket on the KK looks sturdy does yours sit OK Outback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
churchi Posted March 11, 2017 Report Share Posted March 11, 2017 2 hours ago, Aussie Ora said: Hey churchi it's 1.7 kg in weight the bracket on the KK looks sturdy does yours sit OK Outback Kamado Bar and Grill Hey Aussie, I usually put a piece of wood to support the motor under it. the basket is quite heavy and with the protein in there too its even heavier, so if you dont balance the basket properly the motor will jump in places. I thought i would support the motor and put a long piece of wood under it that touches the ground so it doesn't hang. Hope you picture what i mean. ill try and take a pic when i get it out next. Now with the spit rod only and not the basket, you may not need to support the motor at all as its quite lighter on the turn. its just with the basket (which is all i have at the moment) i thought it would be better to support the motor. The motor hangs out quite a bit as well. With regards to the bracket, i have never had an issue with it, just personal preference to support the motor to ensure i dont ruin anything Post a pic of your setup when you get it. Cheers. 1 Quote Link to comment Share on other sites More sharing options...
churchi Posted March 11, 2017 Report Share Posted March 11, 2017 3 hours ago, ckreef said: It's irrelevant which way it spins. One side or the other is always going to want to unwind. Blue loc-tite wrenched down with a 24 hour cure time solves the problem. Of course the new pinned pieces from Dennis solves it better. Ahh ok cool @ckreef ive done the blue loctite trick and it works well. Just when the loctite fails, just put some more on. Does the solid bar piece get around this issue @ckreef? Thx Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 11, 2017 Author Report Share Posted March 11, 2017 Hey Aussie, I usually put a piece of wood to support the motor under it. the basket is quite heavy and with the protein in there too its even heavier, so if you dont balance the basket properly the motor will jump in places. I thought i would support the motor and put a long piece of wood under it that touches the ground so it doesn't hang. Hope you picture what i mean. ill try and take a pic when i get it out next. Now with the spit rod only and not the basket, you may not need to support the motor at all as its quite lighter on the turn. its just with the basket (which is all i have at the moment) i thought it would be better to support the motor. The motor hangs out quite a bit as well. With regards to the bracket, i have never had an issue with it, just personal preference to support the motor to ensure i dont ruin anything Post a pic of your setup when you get it. Cheers. Cheers mate I get ya will sus it out when it rocks up to easy Outback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
ckreef Posted March 11, 2017 Report Share Posted March 11, 2017 3 hours ago, churchi said: Ahh ok cool @ckreef ive done the blue loctite trick and it works well. Just when the loctite fails, just put some more on. Does the solid bar piece get around this issue @ckreef? Thx Yes, from the pictures it looks like it's cotter pinned in place to eliminate this problem. 1 Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 11, 2017 Author Report Share Posted March 11, 2017 Yes, from the pictures it looks like it's cotter pinned in place to eliminate this problem. Are they available yetOutback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 15, 2017 Author Report Share Posted March 15, 2017 Got my motor today whoo hoo will be spinning tomorrow Outback Kamado Bar and Grill Quote Link to comment Share on other sites More sharing options...
tony b Posted March 15, 2017 Report Share Posted March 15, 2017 So, you spinning a chook first?? Can't wait to see the pics! 1 Quote Link to comment Share on other sites More sharing options...
MacKenzie Posted March 15, 2017 Report Share Posted March 15, 2017 I am making stock with the bones from my chicken spin as I write. Aussie, don't forget to save those bone. 1 Quote Link to comment Share on other sites More sharing options...
Aussie Ora Posted March 16, 2017 Author Report Share Posted March 16, 2017 Here it is Outback Kamado Bar and Grill 1 Quote Link to comment Share on other sites More sharing options...
