tony b Posted April 30, 2016 Report Share Posted April 30, 2016 (edited) So, I finally got to use the new rotisserie basket on a cook (more on that part later). Was inspired by ckreef's stuffed chicken, so I started out with the filling materials. That's fresh sage and lemon thyme from my plants. I had an epiphany later after this picture was taken and tossed in some green peppercorns into the food processor. I bought a nice 6+ lb pork loin roast at CostCo, and cut it in half for this cook. Other half got FoodSaver bagged and frozen for another day. Cut open the roast for the stuffing. Slather on the stuffing. Next, the piece de resistance - the bacon weave. Coat everything with "meat glue" (Transglutaminase) to hold it all together. And, viola! Into the rotisserie basket. Onto the KK, @ 350F indirect, with a couple of chunks of hickory. Off the grill at an IT of 165F. That shiny new basket ain't so shiny anymore! It's soaking as I type this in a bucket of PBW. Uncaged. When I cut it open after about 15 minutes rest, the stuffing flowed out like lava! But, it was still damned tasty. No plating pics, as I had a dinner guest and I had dallied long enough with the pictures already. OK, now for the not good part. The rotisserie basket started to come loose about 15 minutes into the cook. The square end bracket started to unthread, as my motor spins "backwards" (counter clockwise - towards you when viewed from the front of the grill.) So, I left the roast in basket and just placed it on the main grate. But, the lid wouldn't close, as it was too long! So, in oven mitts, I had to get a wrench and take off the square shaft. The lid then closed. The violent flopping the basket was doing when the shaft started to loosen, cause some of the bacon weave to come undone, so I had to scurry and stick pieces back on with toothpicks. Not a fun way to start a cook! Now, the dilemma - do I just use blue LocTite on the square shaft threads in hopes that it will hold under load, and live with the difficulties of having to unseal it if I want to use the lower connection on the basket; OR, do I ship the motor back to OneGrill and ask for one that spins in the "correct" direction?? (The other option of taking the motor apart and reversing the rotation is not very high on my list, unless someone here who's done it, says that it's a piece of cake - no specialized tools or soldering needed!) Looking for a little help here, folks! Edited April 30, 2016 by tony b 1 Quote Link to comment Share on other sites More sharing options...
MacKenzie Posted April 30, 2016 Report Share Posted April 30, 2016 What can I say, Tony, not a great experience but I imagine the eats were still very good. Tinyfish, called One Grill when his arrived rotating the wrong way and as I recall they just talked him through it. I would try that option before gluing, but that's just me. Quote Link to comment Share on other sites More sharing options...
_Ed_ Posted April 30, 2016 Report Share Posted April 30, 2016 I ordered from Brian at OneGrill yesterday - he said to me that if you need to reverse the direction, it is a matter of 3 simple screws... and also I quote him below: "On a side note. I have had some people tell me they resolved the directional issue all together by placing a hole in the bung that accepts the drive rods in the baskets and running a screw through it. They have told me this works well and direction does not matter anymore and that it made the basket feel even more rigid when assembled. Another person has told me they simply placed a tack weld on the bung and rod to ensure it never comes loose and unthreads." Quote Link to comment Share on other sites More sharing options...
tinyfish Posted April 30, 2016 Report Share Posted April 30, 2016 1 hour ago, MacKenzie said: What can I say, Tony, not a great experience but I imagine the eats were still very good. Tinyfish, called One Grill when his arrived rotating the wrong way and as I recall they just talked him through it. I would try that option before gluing, but that's just me. MacKenzie is right Tony. I called One Grill and they walked me through it. Very very simple, no soldering. It only took a few minutes. 1 Quote Link to comment Share on other sites More sharing options...
tony b Posted May 1, 2016 Author Report Share Posted May 1, 2016 Thanks, all! I'm going to call One Grill next week and see what it takes to reverse the rotation. That would be the best solution. I'll let ya'll know what I find out and if it's as easy as it sounds. The drilling tap holes with set screws and spot welding are definitely not going to happen!! Quote Link to comment Share on other sites More sharing options...
cschaaf Posted May 1, 2016 Report Share Posted May 1, 2016 Switch the pins around on the basket. That worked for me. It still turned the 'wrong' way for the motor pin, but I just used red locktite on that. Quote Link to comment Share on other sites More sharing options...
tinyfish Posted May 1, 2016 Report Share Posted May 1, 2016 10 hours ago, tony b said: Thanks, all! I'm going to call One Grill next week and see what it takes to reverse the rotation. That would be the best solution. I'll let ya'll know what I find out and if it's as easy as it sounds. The drilling tap holes with set screws and spot welding are definitely not going to happen!! No worries Tony, its very easy. Quote Link to comment Share on other sites More sharing options...
tony b Posted May 1, 2016 Author Report Share Posted May 1, 2016 15 hours ago, cschaaf said: Switch the pins around on the basket. That worked for me. It still turned the 'wrong' way for the motor pin, but I just used red locktite on that. I don't think I can do that, since the spring plate side has a round hole and the motor side has the square hole - so I'd literally be trying to put a square peg in a round hole! Quote Link to comment Share on other sites More sharing options...
cschaaf Posted May 1, 2016 Report Share Posted May 1, 2016 (edited) @tony b No, take the pins off of the basket and switch sides that way. In other words, set the basket in front of you. If the round pin is on the left, take it off and move it to the right. I can't figure out why, but that worked for me. My pins would slowly unscrew until I did that. Edited May 1, 2016 by cschaaf Quote Link to comment Share on other sites More sharing options...
skreef Posted May 2, 2016 Report Share Posted May 2, 2016 Great cook. Since i do some clean, i found magic eraser works great on anything cook in the grill. Ceramic pots., rotisserie, and much more. Sent from my SM-G920V using Tapatalk Quote Link to comment Share on other sites More sharing options...
kjs Posted May 2, 2016 Report Share Posted May 2, 2016 That looks amazing, nicely done. Quote Link to comment Share on other sites More sharing options...
Jon B. Posted May 2, 2016 Report Share Posted May 2, 2016 Tony, Did you use the drip plate on this cook? Quote Link to comment Share on other sites More sharing options...
tony b Posted May 2, 2016 Author Report Share Posted May 2, 2016 Thanks, All. Jon - Yes, I did use the regular drip pan. No interference with the rotisserie basket at all (for the short time it was running!) Susan - I soaked the basket in a bucket of PBW (Powdered Brewers Wash - amp'ed up OxyClean) for several hours. Everything sponged right off. Looks almost new again. Called One Grill this morning and TAH-DAH, we have a motor that spins in the "correct" direction. It was pretty simple, actually. I am posting the instructions in the "Maintenance" thread for posterity. 1 Quote Link to comment Share on other sites More sharing options...
MacKenzie Posted May 2, 2016 Report Share Posted May 2, 2016 Tony, my basket fits in the dish washer. 1 Quote Link to comment Share on other sites More sharing options...
tony b Posted May 2, 2016 Author Report Share Posted May 2, 2016 Good to know. I might give it a shot next go around. But, it might have to be a solo run. Quote Link to comment Share on other sites More sharing options...