DennisLinkletter Posted March 5, 2008 Report Posted March 5, 2008 The problem plagued, worlds longest project pretty much finished. Yes, the project had problems that made me throw it against a wall a few times. But everything works smoothly now.. The small boxs (front and back) against the cooker will hold small teflon pads to keep the tiles from being scratched. The wood table is held in place by the swinging tabs. Yes, the rotisserie motor can be used.. of course. The version shipped will have acorn nuts with sleeves to secure the tables.
primeats Posted March 5, 2008 Report Posted March 5, 2008 Another engineering marvel! Wonder what the side clearance is? Will my Jammies fit over them? Hmm.
Sanny Posted March 5, 2008 Report Posted March 5, 2008 Another engineering marvel! Wonder what the side clearance is? Will my Jammies fit over them? Hmm. Well, it's a known fact that after several months eating delicious Q off of a Dennis cooker, you need new and larger Jammies. Dennis, that is a spectacular thing you did! No wonder it took so long. Not just slap dash side thingies that will bend down and let all the food slide off. Nope. Impervious to gravity! That's an engineering marvel of which Jayne Mansfield could be proud!
tkline01 Posted March 5, 2008 Report Posted March 5, 2008 Awesome!! That is the only thing I miss from my Mexi-K...side tables!!! When can I place my order?!?
trish Posted March 5, 2008 Report Posted March 5, 2008 Very nice touch. I love the teak wood, great complement to the tile. I know where you can get some teak on sale too!
ThreeDJ16 Posted March 6, 2008 Report Posted March 6, 2008 Freakn sweet dude! I am checking my mailbox right now to see if mine is in there!! It has been a long, less traveled road, but as long as things are right at the end...it will all be worth it! -=Jasen=-
Duk Posted March 6, 2008 Report Posted March 6, 2008 Well, I just bought a Gen II Ultimate last night and now this$$$$$
ThreeDJ16 Posted March 6, 2008 Report Posted March 6, 2008 Well' date=' I just bought a Gen II Ultimate last night and now this$$$$$ [/quote'] Get used to continually wanting dude! hehe Between ideas from the forum and Dennis' commitment to continuous improvement, it is gonna happen a lot! -=Jasen=-
johnnyboy Posted March 7, 2008 Report Posted March 7, 2008 Dennis, are those tables the same measurements you sent me on the CAD drawing? Are tables sold as a "set" both sides, or choice of one or the other side? Guess I need to sharpen my chalk and make another pattern, maybe three! BTW, Doubt standard cover will fit; at least I don't think so. Not according to my measurements. John
Sanny Posted March 7, 2008 Report Posted March 7, 2008 Oh sad. Even folded down, the tables add too much hip girth, Johnnyboy? Maybe you could put a slit in the back and put in a "modesty panel." lol
DennisLinkletter Posted March 7, 2008 Author Report Posted March 7, 2008 Yes, they are the same Dennis, are those tables the same measurements you sent me on the CAD drawing? Are tables sold as a "set" both sides, or choice of one or the other side? Guess I need to sharpen my chalk and make another pattern, maybe three! BTW, Doubt standard cover will fit; at least I don't think so. Not according to my measurements. John Yes, they are the same. They can be sold individually.. why not?
johnnyboy Posted March 7, 2008 Report Posted March 7, 2008 Thanks Dennis. Sanny, I'll have to think about your idea! Modesty Panel, hmmmmm you crack me up!
primeats Posted March 7, 2008 Report Posted March 7, 2008 Since I've started using my KK my wardrobe may require one of these clever devices!I've gone from Hunk(in my own mind) to hunka hunka chunk!
Sanny Posted March 7, 2008 Report Posted March 7, 2008 Since I've started using my KK my wardrobe may require one of these clever devices!I've gone from Hunk(in my own mind) to hunka hunka chunk! Oh my - I coulda called that one. I had to stop cookering for a while. Good thing winter came at the same time, huh? But I bet your a handsome hunka! All the best cooker people are.
Farmer John Posted March 7, 2008 Report Posted March 7, 2008 Dennis put me on the order list for the side tables They are great! Another must have thing for my KK
tkline01 Posted March 8, 2008 Report Posted March 8, 2008 Dennis, are those tables the same measurements you sent me on the CAD drawing? Are tables sold as a "set" both sides, or choice of one or the other side? Guess I need to sharpen my chalk and make another pattern, maybe three! BTW, Doubt standard cover will fit; at least I don't think so. Not according to my measurements. John Johnnyboy: do you think standard cover will fit if you only have one side table? Dennis: Will a 50lb roti motor fit? Looks like you have the battery operated version in the picture...the stainless steel motor is a little larger.
DennisLinkletter Posted March 9, 2008 Author Report Posted March 9, 2008 Will somebody please send me the measurements - AC motor Dennis: Will a 50lb roti motor fit? Looks like you have the battery operated version in the picture...the stainless steel motor is a little larger. Will somebody please send me the measurements of the AC motor. Including switch position. Thanks
Hawaiian Pirate Posted March 9, 2008 Report Posted March 9, 2008 Re: Will somebody please send me the measurements - AC motor Dennis: Will a 50lb roti motor fit? Looks like you have the battery operated version in the picture...the stainless steel motor is a little larger. Will somebody please send me the measurements of the AC motor. Including switch position. Thanks Hope this helps 4" x 6 1/4" x 2" 102mm x 159mm x 51mm
