mk1 Posted March 2, 2017 Report Posted March 2, 2017 I am not trying to be difficult, but what does this add to the cook?
Aussie Ora Posted March 2, 2017 Report Posted March 2, 2017 They look fantastic Mac .those forks seem to do the trick .look how close is the the rotisserie rod to your fire compared to the 19 it looks close could definitely do a great pork crackle on thatOutback Kamado Bar and Grill
MacKenzie Posted March 2, 2017 Author Report Posted March 2, 2017 Aussie, I did the cook in the 16 inch and it is pretty close to the lump, maybe 2 inches or so but I did have the basket full. @ mk1, the thing I noticed most is that the meat seems to be continually basted by the meat juices or perhaps you mean why run a rotisserie this way, I'm pretty certain you could get a lot more meat on using this method especially if you were using a larger grill. I was using the 16 inch.
Aussie Ora Posted March 3, 2017 Report Posted March 3, 2017 That's perfect for crackle I just can't seem to get it on the 23 and deep down that really enoys me but I must persist lolOutback Kamado Bar and Grill
Steve M Posted March 3, 2017 Report Posted March 3, 2017 15 hours ago, MacKenzie said: Aussie, I did the cook in the 16 inch and it is pretty close to the lump, maybe 2 inches or so but I did have the basket full. @ mk1, the thing I noticed most is that the meat seems to be continually basted by the meat juices or perhaps you mean why run a rotisserie this way, I'm pretty certain you could get a lot more meat on using this method especially if you were using a larger grill. I was using the 16 inch. I was hoping I could get a full rack on my 23" but there wasn't enough clearance. I believe there is some benefit to the self basting on the rotisserie though.
MacKenzie Posted March 3, 2017 Author Report Posted March 3, 2017 I really don't mind cutting the slabs in half. I find them easier to handle.
Keith OctoForks Posted March 3, 2017 Report Posted March 3, 2017 1 hour ago, Steve M said: I was hoping I could get a full rack on my 23" but there wasn't enough clearance. I believe there is some benefit to the self basting on the rotisserie though. How long were the ribs and was it clearance to the lid or to the bottom? I'd imagine you could do some trimmed up spares or smaller BB whole. Halves do great though, I got 3 racks worth of 1/2 racks in a WSM 18.5". Halves cook just as good for sure. The self basting is much more pronounced on ribs spinning vertically, the glaze that develops is uncanny.
Steve M Posted March 3, 2017 Report Posted March 3, 2017 Just now, Keith OctoForks said: How long were the ribs and was it clearance to the lid or to the bottom? I'd imagine you could do some trimmed up spares or smaller BB whole. Halves do great though, I got 3 racks worth of 1/2 racks in a WSM 18.5". Halves cook just as good for sure. The self basting is much more pronounced on ribs spinning vertically, the glaze that develops is uncanny. They were good size St louis cut slabs. I cut them in half and tried to put one half on a fork on each side of the rotisserie rod. I think they would have cleared the dome but wouldn't clear the charcoal basket. I considered turning them sideways but I think they would have been flopping around too much.
Keith OctoForks Posted March 3, 2017 Report Posted March 3, 2017 2 minutes ago, Steve M said: They were good size St louis cut slabs. I cut them in half and tried to put one half on a fork on each side of the rotisserie rod. I think they would have cleared the dome but wouldn't clear the charcoal basket. I considered turning them sideways but I think they would have been flopping around too much. They must of been good size because those 23" look like deep cookers! Yes stick with vertical on ribs for sure, you'll like they way they cook.
MacKenzie Posted March 3, 2017 Author Report Posted March 3, 2017 (edited) I didn't have mine put together quite right and I took another pix showing how they are to do it properly. I didn't have the any bolts in the square holes on the ends. This will lock the forks in solid and also make adjusting a little easier. Some people only read instructions only when all else fails. To adjust them all you need to so is loosen both the bolts a little and slide the fork and tighten again. It is much easier to make adjustments with this setup. I had them like this- Edited March 3, 2017 by MacKenzie 1
Keith OctoForks Posted March 3, 2017 Report Posted March 3, 2017 3 minutes ago, MacKenzie said: I didn't have mind put together quite right and I took another pix showing how they are to do it properly. I didn't have the any bolts in the square holes on the ends. This will lock the forks in solid and also make adjusting a little easier. Some people only read instructions only when all else fails. I had them like this- Yes they'll adjust much easier that way now. If you ever need to get around bones in a piece of meat you can adjust that side to miss it too. They cleaned up good it looks like! Sometimes mine are so baked on they really need some soaking. 1
MacKenzie Posted March 3, 2017 Author Report Posted March 3, 2017 I didn't spend a lot of time cleaning them. If they get real messy I'll put them in the dish washer.
Pequod Posted March 3, 2017 Report Posted March 3, 2017 Expecting my Octoforks to arrive tomorrow. Hoping to take them for a spin soon.
Steve M Posted March 3, 2017 Report Posted March 3, 2017 37 minutes ago, Keith OctoForks said: Yes they'll adjust much easier that way now. If you ever need to get around bones in a piece of meat you can adjust that side to miss it too. They cleaned up good it looks like! Sometimes mine are so baked on they really need some soaking. Give that PBW a try. I think you will like it.
MacKenzie Posted March 3, 2017 Author Report Posted March 3, 2017 HalfSmoke can't wait to hear all about your spin.
Keith OctoForks Posted March 3, 2017 Report Posted March 3, 2017 Yes I want to check out that PBW too. I love using this ultrasonic cleaner but it's only as good as the solution you use. Right now I'm dropping in a dishwasher tablet but adding some of that PBW might power through the baked on even better. I cook pretty hot sometimes and it's always over flames so things can get seriously baked on which is why I picked up this ultrasonic.
tony b Posted March 3, 2017 Report Posted March 3, 2017 4 hours ago, Keith OctoForks said: Yes I want to check out that PBW too. I love using this ultrasonic cleaner but it's only as good as the solution you use. Right now I'm dropping in a dishwasher tablet but adding some of that PBW might power through the baked on even better. I cook pretty hot sometimes and it's always over flames so things can get seriously baked on which is why I picked up this ultrasonic. Just go with the straight up PBW. I'd be a bit cautious of mixing chemicals. I use PBW in my brew room all the time. I've been a staunch advocate on this forum for using it to clean grates and especially the rotisserie basket. Unfortunately, the roti basket is longer than a standard Lowes/Home Depot 5 gallon bucket. But, it's a simple matter to flip it over after a couple of hours and soak the other end. To do grates, folks have been using big tubs used to mix up mortar/cement like these. https://www.lowes.com/pd/MacCourt-Drywall-Mud-Pans/1054711 1
