All Activity

We've been getting a lot of SPAM messages lately. You might have just been caught up in scrubbing those bogus accounts. Sorry.

The Hasegawa and Asahi cutting boards will have cutting surfaces superior to any other I have used. Both for protecting the knives and actually cutting food more effectively. Bamboo is hard on cutting edges; it's penalty work for my woodworking neighbor. Various synthetic boards chip on me; they aren't expecting my sharp knives. And a company that flogs pure titanium pans on Facebook also sells titanium cutting boards, which tipped me off that they have no idea what they're doing. Sure, titanium is softer than steel, but that's far from the whole picture. I'm loving my Hestan Titanium Chef's Pan which is actually a molecular titanium surface deposited on steel that is 4x stronger than steel, and slick, leaning in the "ceramic nonstick" direction but more durable. But pure titanium is a terrible idea for a pan. Luckily, my knowledge of cutting boards saved me from a mistake. The Japanese, of course, are expecting sharp knives. I have long had a raw butcher block work surface in each kitchen, with an overhang to mount tools. I wash the surface by scraping with a bench knife into an (empty) steam table insert that also collects compost as I work. Since getting Japanese cutting boards, I only use the bare wood some of the time, like for prepping winter squash. I am delinquent in bleaching my Japanese boards again, which does work. I lay down paper towels on the board surface in a utility sink, pour over a bleach mixture just strong enough to turn the paper towels back to pulp. But I'm not expecting Michelin inspectors any time soon (their loss!) and the stains don't bother me. Still, black? Clever. 600cm, wow. Cutting the Hasagawa boards (which you don't plan to do) would expose the wood core. Artists know this one: Cut both ends, make it look deliberate. 😀

So sorry for your loss.

Hi all, I don’t post often. However enjoy following other members posts. A couple of weeks ago I was Banned for no apparent reason that I was aware of. I reached out to Dennis explaining the situation, everything was restored immediately. Again a thank you to Dennis for his quick response. Regards Seasport

Thanks @5698k. I remembered your obsession with knives and was hoping to get a response from you. I am particularly taken with you saying that you are able to hold an edge on your knives for up to a year as a result of using better boards. Thanks for this input re the Hasegawa board @Syzygies. It looks like it is lighter than the others as well. Before I started this post about boards I searched the site to see what else had been said on the topic and found a post from you that I would summarise as "go big or go home" i.e. get the biggest cutting surface that you can to help you work efficiently. As for you @C6Bill? Your input helped me remember that there are perfectly acceptable, cheaper ways to tackle this problem. That said, I was already half way down the rabbit hole when I posted and your message didn't succeed in hauling me out. I have ended up ordering one plain Asahi board at 600cm x 33cm x 2cm, two black Asahi boards at 600cm x 30cm x 2cm and one composite Hasegawa board at 600cm x 30cm x 2cm. We will try them out and see what we think. I see us reserving the Hasegawa board for sushi and fish filleting. I particularly liked the advertised heat resistance of the Asahi boards. The Apex boards I was previously looking at should only be washed at relatively low temperatures and have to be stored flat to avoid warping - not a great idea when enthusiastic friends or house guests might get hold of them and "help" without realising the damage they might do. There is a chance that we might cut at least one of the black Asahi boards down to get more manageable sizes for quick use. That might be unnecessary and we might end up buying a few small, cheap boards for things like cutting lemons for drinks or other quick tasks. Plan is to ditch our very old and scratched Epicurean boards and to select which of our wooden boards to keep. The only remaining wrinkle is making sure we have enough boards with a channel that allow juice from resting meat to gather. That'll be likely in the wooden board category. Thanks for all your help. I will report back when we have had a chance to try them all out. P.S. I just looked at my avatar and realised it is of Sinbad, our beloved cat, who died just a couple of weeks ago. He had the best death of any of our cats to date. Having just celebrated his 14th birthday he was still running around like a kitten until one day, he just went out to do his usual patrol of the garden and my husband later found him dead on the ground. The vet thinks he had some kind of a heart attack. Rest in peace S. He will stay here as my avatar.

Only photo from Thursday

Much easier.. KISS works here.. These photos are of the mockup.. In the final version, the gap between the two triangles is filled.

Thank you!

Thank you!

HASEGAWA PRO-SOFT RUBBER WOOD CORE CUTTING BOARD FSR 19.7" X 13.8" X 0.8" HT Traveling solo in Japan, I'd often sit at bars where I could watch chefs work. I learn, and I have always taught my math students to learn, by absorbing the mindsets of others I admire. Cooking isn't following lists of ingredients. This is the class of board I always saw at the stations that relied on knife technique. I now have several sizes, duplicated when I had two kitchens. I consider these the canonical answer to your question, with the same certainty as "the JVR Vac-100 is far and away the best entry level chamber vacuum machine" (again I bought one for each kitchen, in each case replacing a far clunkier VacMaster). They do stain. One can ignore this, or soak with a mixture of bleach and water. My "Made in Japan" hall of fame also includes items one would expect to buy from China: the best cleaver and best wok I've ever owned, again duplicated while I had two kitchens. We saw the New York wok last night in constant use yesterday at California friends' Thanksgiving, for various veggie sides. They ship worldwide: Tojiro DP 3-Layer Chinese Cleaver 225mm (thin blade) Yamada Hammered Iron Round Bottom Wok (1.6mm Thickness) Yamada Hammered Iron Flat Bottom Wok (1.6mm Thickness)

I have a couple but nothing extravagant, typically I just grab my OXO when chopping veggies or my Boos block for meat. I go to a restaurant if i want fish, i just don't cook it at home. So long story short, i can't help you lol

I use Hi Soft, very similar to asahi, and i love them. I’m a bit of a knife snob, all my knives are carbon steel, with very fine, sharp edges. I sharpen at roughly 12* per side. My point is that even with these edges, these boards are great because they dont affect my edges at all. I can easily go a year between sharpenings, and even then, the edges are never damaged because of cutting surface. They’re also very sanitary, they dont gouge like other synthetics, which is where bacteria grow. They’re also very can be bleached or sanded, should the need ever arise. Sent from my iPad using Tapatalk

Oh my !!!!! That looks amazing !!!! Love that crust, i might have to try that method

WOW!

Hi there. I am about to dive down a new rabbit hole and I thought I would drop by and see if you could help me dig deeper. A number of top UK chefs recommend the Apex cutting boards. They are eye wateringly expensive if you search generally on the web but I managed to track down the UK source and managed to get it down to a manageable £165: https://rowandsons.co.uk/collections/chefs-at-home/products/apex-cutting-board I then did some more searching to confirm or change my choice and found this YouTube video in which asahi and hasegawa cutting boards are recommended. They are more reasonably priced and the Black Friday sales would be a good option for renewing our very old stack of cutting boards. We would keep the good wooden ones for serving and chopping but a fresh set for fish, meat and veg prep would be great. Grateful for your views and recommendations before I pull the trigger.

Been quite a while since I last posted a cook on here, so thought I would share this one. I really wanted to do something different other than just smoking another Wagyu Prime Rib for the holiday (yes, I know how weird that sounds to say, lol) and I was fortunate enough to acquire this beastie 2 days before Thanksgiving. Prepped with salt, pepper and garlic (kept it simple) and smoked it on the Ultimate 23 for 8.5 hours at 225 degrees using Coco Char with a combo of hickory and plum wood and end result was amazing, the flavor, juiciness, tenderness (and that A5 richness!) were absolutely insane, it literally dissolved on your tongue! Calling this one a HUGE hit with the family is an understatement, will definitely be doing this one again in the future!👍☺ Thank you, Dennis, for making such an amazing grill!!🙏👍👏😊

A distant cousin I presume, it only had one leg....I'm sure your didn't mind.

I got a really weird looking turkey for Thanksgiving this year. But it tasted great 😊

Turkey Day on the KK followed by smoked salmon with honey and the recent post of a recipe of sweet potatoes. That recipe is a keeper, rich, but on occasion oh it's an addition to to the table. I used fresh sage with the fresh garlic, they balanced each other well....from the Out and about post recipe. The Turkey was basted with butter at the end on the skin, it was an easy cook and an enjoyable feast.

Looks good @remi

Does this include accessories? Have the prices been adjusted on the site or is the discount applied at checkout?

The DeWalt requres 3 blades I belive and like mine were in the Rigid having two were dual sided. The helical heads have 4 rows of 10 blades of either tungsten or cardide in each. You simply loosen the square blade and turn 90 degrees. The matierial lends itself to a long wear and if you experience a small chip you simply replace that singular blade. Due to the configuration of how the blades are laid out on a curved placement line of 4 rows it eliminates some stress straight blades would have and also the finish is noticeably better. Find Buy Tools makes a replacement head for the DeWalt, many people have done so as I've seen on line and the video instruction is available on line also. In addition to Dennis's and Syzygies wine racks I remember making one too approx 35 years ago holding 120 bottles, the plans were from a craftbook with simpler models. However that's not the point, the point is I could never fill it....it seemed to disappear in volume every time I walked by. I gave it away and went back to standing a few behind the bar. Great job there boys, it always a good feeling of accomplishment, nobody can take it away.

Wow, I love your design. I'm very happy with my pragmatic design, using metal grids. And I usually cringe at the loss of bottle density in most "artistic" designs. Yours is great looking, celebrates wood, and doesn't give up bottle density. With the right jig and a great router table (I have Jessem's best table) can one knock out your vertical elements? I'd cut V's so the boards mated with the eighth turn bigger sticks. Or do I have this wrong?

My sister asked for a teak wine rack, and I love the results. It's one of my favorite projects in 35 years of building furniture professionally. These are my hand-hewn teak floors. https://handhewnfloors.com

Tyrus - yes, the upper cabinet is meant for the wine glasses and large tea/water glasses to stand below them, forgot to mention that detail, thanks for asking. I am looking at replacing the straight blades in my dewalt planer versus buy new, no decision yet.