Leaderboard

When I was trying to decide what size KK to buy, all those years ago, @ckreef's advice was to buy two. He was adamant you needed more than one to make sure you got all the components of your dinner ready at the same time. Well, I took his advice and here is Christmas dinner, cooked on my 23 (high heat throughout) and 32 (very low and slow for most of the time and hot at the end to cook up the pigs in blankets). Happy Holidays everyone! I never normally have turkey but here is a boned turkey leg which I seasoned and then my husband added lardo and rolled it up for roasting. Rolled turkey leg and standing rib roast in the 32 after first having been browned in the 23. Potatoes were roasted in the 23. And the pigs in blankets (sausages wrapped in bacon) were cooked on the 32 when the other meat was taken off to rest. I finished off the skin on the beef roast with the MAPP torch before resting. The cook was edge to edge perfect, with the very low and slow time it had in the 32. It was an outstanding Christmas meal, with just the Brussel sprouts and sauce cooked indoors. Deeeelicious!

3 bone prime rib, bones on the bottom protecting the spinalis. The pan is 16” wide, the 38” just swallows it up. Mixed in the butter is thyme, rosemary, garlic, and black pepper. I dry brined it overnight. Merry Christmas everyone! Sent from my iPhone using Tapatalk

Chicken cooked in double bottomed pan went very well last night. The bread heels soaked up the juices and were lovely. Followed by tarte tatin. Enjoyed the meal with @RokDok and his wife who came to ours for an overnight trip to pick up the sausages we made for them.

Picanha on the roti to celebrate an unusually warm 70 degree December day in St Louis.

Back in Italy to enjoy the lead up to Christmas. Cooked ribs on the 16 last night. Came out great. No pix. Used the heat shield/paving stone for the first time. It was a good call, the short distance between the fire box and the grate means I have found it difficult to genuinely cook low and slow without something to shield the bottom of the food from the fire. I am near Venice and in the home of bigoli pasta. Today I am trying three versions using a Chad Robertson recipe that uses up spent leaven. Here we are at the first stage: I am experimenting. Bigoli are made with buckwheat flour as the base. I made three variations. The first with durum wheat, the second with whole wheat flour ground from UK hard wheat grains and the third with Italian 00 flour. I followed the quantities for the recipe without thinking for the first one with durum wheat. It was too wet and I made the necessary adjustments for the second two. Will see how each extrudes, using the bigolaro, later today. KK action? Boiled meats are a speciality here and, as well as capons, they include beef short ribs. I have set the KK going and will do a nice slow cook in place of boiling and will see what the Italians think of it. Warming up now:

Zucchini, round and deep, cheezy and cooked on the the 23. Nice attractice addition for any table. Three layers of flavor, another way to present a cook on your table as a side. Make it with just veggies or add a layer of sausage . Prep is a concern, brine the cut 1/4 in Zuc for 1/2 hr in salt brine, remove, should be dry patted and then lightly fryed afterwards. Line your bowl in parchment and layer with Zuc, sauce of your making, and topped with cheese & breadcrumbs. Add any additional spices you like for your flavor expression desired. Oh, once it's done, about an hour or so to reach a 130-40 temp, let it cool to congeal but stay warm to serve. A good cheap side presantation, but it looks like a million. Use a casserole dish, easy prep

Say hello to Max, yes i named him after the Grinch's dog lol He is just the sweetest boy ever !!!!❤️

I wouldn't buy anything in that store, period.

He is a rescue out of Tennessee. He and his sister were lucky enough to be grabbed by a rescue group down there and shipped up here to the Boston area. He is 7 months old and as of yesterday weighs 72 pounds. Once he is all settled in I will be going back to get him a friend. They get 20 to 30 puppies a week from down south, up here they are taken in as family members. I think he likes it here,

Thanks, he is missed. He came here with his bags packed full of issues and he eventually got over most of them I'm in touch with rescue now as my house is just way too quiet without him

Here's an incense burner that'll make you look twice. I enjoy the odor/scent incense imparts to a room, so over the years I've collected a few incense holders of unique design to pleasantly aid the eye with a sense of calmness smoke offers. My niece seeing my collection thought I needed a piece to match the smoking elements in house and yard, but with a twist. The piece incorporates a downdraft design allowing the smoke to escape from different areas mimicing a realistic interpretation. Although I found it unusually distant as compared to my traditional Japanese holders, I do believe it has a place. However, with as much enjoyment incense smoke contributes to your well being, still nothing beats the smell of a brisket slow cooking in the back yard.

Wow, what great cooks those were, Tekobo, mouth watering dinner. 👍👍A special mention to the potatoes, the colour- perfection.😍

This experiment was a big FAIL initially. The doughs were way too wet to put through an extruder. I remembered @Syzygies once lamenting the fact that some bread recipe writers do not take account of the amount of liquid introduced by the levain. Well, without counting the liquid added by the levain, the hydration of this Chad Robertson recipe was at 45%! Waay too high. My neighbours kindly and friends kindly ate what I produced but it was substandard. I finally ended up with a very stiff dough, somewhere between 28% and 32% hydration depending on how you count the water added by wetting my hands while kneading. It was really hard work turning the lever to push the dough through the bigolaro but the result was worth it. Bigolaro action: Really simple but delicious pasta recipe called bigoli in salsa, made with just onions and chopped up anchovies. The dough was fermented for 18 hours. I think the pasta tasted better than any I had made before but I will do a side by side test without levain to see if that is just my imagination. And the KK action came in the form of roasted short ribs (should have been low and slow but I fell asleep and they cooked hot and fast instead!)

Happy holidays everyone !!!!!! Turkey done earlier and the prime rib is in now, I’ll update later

Made it, your right, I was lickin the spatula clean. It's tangy and thick, but not too thick & keeps you coming back looking for more. Your right too, there's room for addition, hot sauce, side sweet..not sure. Done and bottled, I prefer a pork pair although I won't discount beef...just thinking how it will deliver after heat in the KK as a crusty pleasure or sticky side.

Seems like a fancy way to make toast, but of course a desirable end. Looking good Tekebo, your always shakin the boat.

I wish you many, many happy years together. Condolences on your loss. Your fellow dog lovers know the intensity of this. It has been more than 5 and 3 years since we lost our chocolate and goldendoodle. My wife and I still toast them every night.

The journey of discovery continues. The thinner Asahi board arrived and my husband set about cutting it down into more handy sizes yesterday. I think it is 15mm thick and it was pretty floppy as a large board. Cut down, it makes for good sturdy small boards for quick jobs. Pic of workshop set up below. He has since sanded down and bevelled the edges and we have already started using them for small jobs in the kitchen.

all this cutting board talk reminded me to sharpen my knives....

We usually have something fancy for New Years, and this year I purchased some lovely scotch fillet from a legendary Melbourne butcher who is about to retire- had him slice them nice and thick for a reverse sear. It was also a chance to debut the RFX probes I received for Christmas, and to make a first stab at a Bernaise sauce. All in all a great success. Happy New Year!

Hi Tekobo! Let me send you a custom handle! With some reworking, your torchio can take on any powered machine. I'm gearing up to make bespoke handles from Jatoba hardwood and laser cut stainless steel. Or if you like to do your own woodworking I can send you the DXF file for fabricating the boss plate. The handle shown above is a prototype using an oak dowel. Here is my response to being asked about my bigolaro on the Rancho Gordo Bean Club Facebook group: This is a "Torchio Model B" bigolaro by Bottene. They also make the powered Lillo Due for home and restaurant use. The Model B accepts the same bronze dies, opening up a vast catalog of shapes. https://bottene.net/en/products/bigolaro/ https://pastabiz.com/torchio-hand-press.html https://it.wikipedia.org/wiki/Torchio_da_pasta This design is one that has been in use for centuries in the Veneto region, primarly to make "bigoli" noodles. These are fat round noodles sauced with an anchovy, sardine, liver, or duck sauce. The noodle recipe is tuned for ease of extrusion through its namesake bigolaro, requiring less pressure than a powered extruder. Bigoli noodles are an obscure corner of the pasta universe. As we prefer homeground flour, we have long dismissed dried noodles, even from whole wheat, in favor of Atlas or similar (Otello is an upgrade) laminated egg noodles, or hand-formed shapes such as busiate. Shapes are nevertheless a major part of the Italian pasta experience. Pairing shapes with sauces for Italians is a profoundly deep enterprise. One cannot fully dry extruded pasta at home with the same care as an artisan factory: Varying climates is why there was an early trade in dried pasta. If someone tells you they're happy drying extruded pasta, they're telling you two things: They're happy, and they're drying extruded pasta. An Italian would not be happy; they'd find someone who can do this right. Pasta dried for part of a day is neverless a wonderful third category, that opens up the entire experience of pairing shapes with sauces. This is what most restaurants with extruders do. Pasta: The Story of a Universal Food https://www.amazon.com/Pasta-Story-Universal-Silvano-Serventi/dp/0231124422 I am thankful beyond words that Bottene chose to modify the design to accept Lillo Due dies, but we are left without guidance for how to best use dies designed for greater pressure. With a maniacal attention to detail, the "a serious bunburyist" blogger has managed to make good use of a variety of bronze dies, but even he has moved on to a powered machine. The basic problem is that a dough wet enough to extrude will come apart (gravity unwinds fusilli) and stick together. https://ibunbury.blogspot.com/2010/06/confirmed-and-secret-bunburyist.html Am I an insane mathematician, for figuring out what to do? (My hands played one, once.) https://www.newyorker.com/magazine/2002/03/11/a-beautiful-hand People go to more trouble than I went through when a drug is involved; pasta is also worth it. People roll their eyes that we grind our own flour, but they grind their own coffee? Same thing. What I'm about to describe is not hard. I don't want to clean, or store, or lug around a heavy powered machine. I love hand tools, such the better-than-vintage woodworking tools that Lie-Nielsen makes. https://www.lie-nielsen.com I've had my bigolaro for fourteen years, but only recently has it become our daily driver, the routine way we make pasta. That was a long road. A few years ago I destroyed the boss socket in the stock handle through misguided experiments with too-stiff dough. After some hilarious failed improvisations, I learned to respect the forces involved. I fabricated replacement boss plates from 1/2" thick stainless steel using the custom parts service SendCutSend, and mounted these plates to longer wood handles with better leverage. https://sendcutsend.com What broke next? Further misguided experiments lead to howling noises that I labored through; I wanted dinner. It turns out that all grease is not the same; who knew?! If a grease doesn't publish a Tinken Load and Four-Ball Wear Test, it will simply skip town under duress, leading to a howling metal-on-metal contact that grease is supposed to prevent. I replaced my worn threaded shaft assembly, and applied a grease a factory might choose, for a radical upgrade in performance. If one makes a single modification to a stock torchio, this is it: Disassemble the threaded shaft assembly, take it outdoors to strip any incompatible grease, and lubricate it with the best grease one can source. Apply a bit more for every use. If operation isn't dead silent under extreme loads, you're doing this wrong. https://www.grainger.com/product/CRC-Extreme-Duty-Food-Grade-Grease-12G591 I also upgraded how I mount the bigolaro to the same overhang I use for clamping other kitchen tools. I slightly enlarged the holes to accept 5/16" bolts and oversized nuts, washers. Now the bigolaro is effectively fixed to the foundation of my house. Believe it or not, there was some play using a 1/4" bolt, nut, washer combination. Now, one has a device that accepts Lillo Due dies, and with 20 pounds of force at the ends of a 26" handle can extrude with more power than a Lillo Due. One cannot now simply use a Lillo Due dough recipe, because the mechanics of extrusion are different. A powered extruder uses a twist screw, while a bigolaro is a piston that compresses the dough waiting in line. Nevertheless, one is now free to work out a more flexible range of dough recipes, less likely to fall apart or stick together after extrusion. In our case we use freshly ground flour (primarily durum and Kamut) and a sourdough process that improves flavor and glycemic index. I've settled on adding 4% psyllium (the same hack factories use to make gluten-free pasta) and extruding my dough cold after an overnight fridge rest. These steps both enable and require a higher hydration; for my specific dough I like 43%. My pasta doesn't fall apart or stick together. Now that I've figured this all out, I need to write up a web site with handle plans that even an apartment dweller can assemble (e.g. order 1 1/4" square staircase balusters online). I should also offer to make handles for people. Ideally, I can convince someone who already sells pasta woodworking to make handles. Probably this constellation of ideas is overkill; after one appreciates the issues in play, one only needs to address a subset. Start with the grease, then the handle, then tweak your own dough recipe. A torchio should be in as widespread use as an Atlas crank machine, rather than in a cupboard like a twice-used rowing machine. These challenges are easily surmounted, and the results are worth the trouble. What can we do to make this practical for other people?

Beautiful looking cook! I have to agree that two cookers is a big advantage. It took me a while to get a cooker larger than the 23”, now it’s like where has this been all my life. Sent from my iPhone using Tapatalk

Have KK will travel. OK, you must have a dolley to move that or the stand is on wheels. Nevertheless it's gotta be a touchy situation...I give you credit though, the effort is only outweighed by the food that comes off of it. He ain't heavy, he's my KK.

Hi, y'all, it's been a long time, but I have been busy cooking and growing stuff. I just want to post about Johnny Harris's barbecue sauce, which I discovered many years when we visited Savannah and Johnny Harris's restaurant was still open. Went there on a local recommendation for barbecue, and while the barbecue itself was, I guess, okay, but the sauce was, I thought, really remarkable. When we got home back to Shreveport (our home at the time) I started trying to replicate it, and never could get close. The internet was just starting to blossom with online discussion groups, and I joined a barbecue forum, and got around to a discussion of barbecue sauce and I. mentioned Johnny Harris's and failed attempts to replicate it. A nice woman on the forum gave a "cheater recipe" for it that came pretty close, and it became the base for my experimenting to make something closer to my own making. Over the years, I would experiment and tweak the recipe, gradually evolving it. It still didn't taste exactly like Johnny Harris's, which I was buying through mail order (the restaurant has closed in 2016, I think, but the name and recipe for the sauce was sold to a 3rd party, and the sauce is still produced and marketed over the internet, along with several other sauces (they do a great job on the shipping end, BTW.) Then, a couple of months ago the Johnny Harris Cookbook came out, and much to my surprise, they published the barbecue sauce recipe: sauce recipes are usually closely guarded secrets. It is not much like anything I would have expected. So here's my recipe, below, and I attached a photo of the recipe from the Johnny Harris's cookbook. Johnny Harris- Style Barbecue Sauce 2 tbsp chili powder 2 tbsp fine ground black pepper 2 tsp white sugar ½ tsp salt 4 cups catsup 1 cup yellow mustard 1/4th cup Worcestershire sauce 1/2 cup real cider vinegar (may experiment with other vinegars, like champagne vinegar or sherry vinegar) ¼ to ½ cup packed brown sugar (prefer dark) (May substitute honey, and add dark molasses. Should be to your taste. 2 tbsp butter 3 Tbsps fresh lemon juice Directions: Combine catsup in mustard in large pot. Warm on low heat. Stir in all ingredients except butter and lemon juice and mix thoroughly. Cook on low and stir frequently until well blended- 15 minutes. Remove from heat. Cool for 15 minutes. Add butter, stir until thoroughly blended. Add lemon juice to taste. Best if heated before using. Do not boil. This is the base recipe, and it is good for all meats- beef, chicken, pork, etc. I also usually use both honey and dark molasses (as above) for the sweetener. Taste at the end and add more honey or sugar or salt if needed. You could add cayenne pepper or hot sauce if you wanted it hotter- most of the heat in the recipe comes from the black pepper. I have also added several shots of espresso sometimes; tried dark chocolate once to good result; tried adding (separately orange marmalade or raspberry jam to give it a more fruit base.) You can also experiment using different vinegars (like champagne or Spanish sherry), but this is usually a lot more expensive for very subtle difference. You could also try adding a little cinnamon, Chinese five-spice, or both (not more than a teaspoon.) CDC1B288-7AE2-42F5-AA63-4AA328FF67EB.heic

My son-in-law, Cory, is having his office party at their place (four houses down the street from us) and has requested my assistance in making pork shoulder for what is planned to be a big taco table tomorrow. So yesterday evening I set up up with the Kamado, got the Fireboard all ready, and liberally coated the two Costco pork shoulders with Dizzy Pig's classic Dizzy dust. This morning I started preheating the smoker and put the pork on the grill a little before 10. By my calculations, they will be ready about 8PM. BTW, I don't know what anyone else's experience with Fireboard is, but mine is mine is somewhere between good and great. It does a really fabulous job keeping the temperature plus or minus 5* of where I set it. 90 minutes in: temperature is a perfect 170*, one shoulder is 102*, the other is 8o,1: I will have to switch them on the grill in another hour or so. Stay tuned. Photos of the completed project later tonight. 26AC4152-2310-4CCC-8F76-7A0CDFBC2E0A.heic EB3896C9-9E44-4614-AC14-5EB319BB13C7.heic

Olivewood End Grain Carving Board (Arte Legno, Italy) I do love a good end grain cutting board. Shown is my favorite; I used a UK source. The end grain testimonials here happened to coincide with my pulling out this board to bone some chicken thighs that I had cooked sous vide in a Chettinad pepper masala, best chicken curry of my life. My smaller "utility" Hasegawa board is shown for comparison. For any detailed knife work such as mincing, I always reach for one of my Hasegawa boards. I have a great capacity for creative delusion, balanced by high entropy, so I find what I do after I stop thinking to be informative. On the other hand, food is part romance. For anyone who hasn't admired the attentive composure of Japanese chefs working in front of you on a Hasegawa class board, the end grain wood is more romantic. And it rarely makes sense to have one type of tool, though my cast iron, carbon steel, enameled cast iron, and various clay pots are all talking behind my back as I go all in on Hestan NanoBond pans for utility use. Many reviews haven't made the effort to learn best use of this molecular titanium surface, yielding a metal pan that thinks it's ceramic nonstick. If with careful technique I can glide a fried egg across its surface like an air hockey table, and I don't want teflon nonstick pans for health reasons, then any other pan becomes a speciality player. I've had other kinds of laminated boards chip on me; my knives are sharper than they imagined. I don't see a health hazard with my Hasegawa boards. And I bought their sanding block, tried it once, and haven't thought about it since. I will simply buy these boards again when the time comes; they are that important to me.

@tekobo i don't know if asahi offers a sponge sanding block, but hasegawa has one to smooth out the board after heavy use. but i've never been able to smooth out the surface other than raising up even more plastic "fur" on top. but again, microplastics don't bother me. i'm asian and immune to it from years of eating hot foods out of plastic bags. and because i'm unable to smooth the board out, i am leaning towards wood (endgrain) for my next board. and if it dulls my knives a little faster, so be it. i rather enjoy sharpening anyway.. if i have to buy another synthetic, it would be the the black asahi for plebs, not the pro kind..

We spent the weekend at @RokDok's cutting up a rare breed pig. We got half and I spent an hour this morning cutting some up for mincing to make pies. Just look at that marbling! And just look at that space. It was a joy, cutting this up on my new Asahi board. I think this light coloured one will become my raw meat board. I'll be able to see any marks and stains and can keep it extra clean by sanding it down once in a while. Introducing these boards simply replaces the plastic and Epicurean boards that we used to use for food prep. I still have a wooden board for chopping and a range of wooden boards for serving. I hear you, @David Chang, regarding micro plastics but I don't plan to use a serrated knife on this and will be intentional about using a different board if I need to do any heavy chopping. It actually makes me wonder about how much chopping one actually needs to do when you are not butchering an animal and needing to chop through bone. I do the rocking action for cutting things small and chopping, on any surface, must incorporate little bits of the material that you are chopping on. I am enjoying this journey so far. The black boards are due to arrive from Japan next week. All of the boards that I bought are 20mm thick. My husband usually does the procuring of stuff around here and I think he felt a bit left out. He has bought a thinner Asahi board to cut up to make small boards for quick jobs. Lots to look forward to in the lead up to Christmas.

There’s no doubt that end grain boards can be extremely beautiful, and definitely have a place in the kitchen and beyond, i have just found that for the vast majority of my kitchen prep, the Hi-Soft, Asahi, Hasegawa boards are my go to. They’re light enough to maneuver, but heavy enough to stay in place. Their surface can be repaired from every day use, keeping them sanitary. They have a soft feel under the blade, reducing fatigue when doing a lot of chopping, and as i said before, are the best I’ve found at preserving your edges. Sent from my iPad using Tapatalk

Only photo from Thursday

Wow. Great halloween decoration

Twisted? Hmm, is that a good thing or a bad thing? Would you prefer I drop a steak over it and use it as a smoker?

As is an annual tradition, I planned a brisket for a dear friend's birthday party. After I'd sourced the meat, she canceled. No party, everyone had the flu.

 Marin Sun Farms at Rockridge Market Hall confidently told me this would be a great brisket. The cautionary tale I had in mind: In Think Like a Chef, Tom Colicchio has a stellar recipe for braised beef cheek. I tried this with a California beef cheek, and it was like Charlie Chaplin’s stewed boot. We figured organic cattle smile too much. The cautionary tale I should have had in mind: Berkeley Bowl once tried to sell me a cyrovac pork shoulder. The symmetry was unsettling. I realized still in the store that it was a pair of pork butts. I was being a clod, thinking more of the first story than the second, and didn’t react to the unusual shape. I’ve never seen a brisket this tall and squat. I got one thing right: Rather than going to Las Montañas for generic chiles, I just used up my hoard of chiles from Boonville Barn Collective, and ordered more. Best rub I’ve ever made. I never would have made the party; after eleven hours at 275 F this meat was nowhere near done. An Akaushi Wagyu brisket this size would have needed 8 to 10 hours. Slicing a hunk off the end for dinner, the flavor was great, but no collagen or marbling to suggest further cooking would help. And it didn’t look at all like brisket. No deckle. So I parsed the rest into pieces to use as an ingredient various ways. Chinese noodles? Hash? I’m thinking Borscht. I’m guessing this was a legendary cut that I’ve never been able to find before, that was sold to me by accident. I’ll hold back my guess in hopes others will weigh in.

AI (our new family dog) says its a beef clod heart.

🤣

You know Syzygies deja vous, I recently popped a roast out of the freezer unlabeled and was wondering the same. My curious eye seems to think that it's a Chuck roast, has the cut & shape, grain and color, similar and in the same neighborhood. You can eliminate the flat, it has the markings and some orentation of being the point in the raw, but I'm leaning towards a tender chuck roast having seen something similar recently at the market and just purchased. Well, if your disappointed in the texture hold your head up high on appearance and a fabulous bark. I'm thinking a packaging mishandle, label or the new butcher on the block, happens to us all, don't despair and be thankful it wasn't bear. It might yet remain a mystery, however we can definitely rule out rib eye and tenderloin. When in doubt, ask the family dog...they gotta nose for these things.

Definitely a great marble going on there and a nice finish. Finding a new butcher...too bad, someone that's done you right so many times. There's always mail order, but that can get expensive, best of luck Remi and a safe and Happy New Year to all.

Well i'm thinking i need to go find a steak now lol

That’s where Dennis really thinks things through. I bought a 32 last year, and loved it. I did notice, that as i get older, lifting the grates on a 32, particularly when hot, is noticeable. Then i bought a 38. It has three piece grates, as does the 42. Between the split grates and the fire splitter, it’s super easy to manipulate everything. Sent from my iPad using Tapatalk

I agree! The bit of advice I did not take at the beginning was to buy as large as I could afford/had space for. I therefore started with a 21 and 23 but a few years later I saw the light, sold them and went for a 32,23 and 16 combo. That 32 is a multi tool and if I only ever had one KK it would be the 32. I no longer hanker after the 42 (plus free goat). I can lift and wash the grates in my 32. I dread to think of the sheer effort required with a 42.

I have to say those were all nice creative festive cooks, although I have to give the nod to Tekebo for pitchin the change up. In the states though we like things straight down the middle......a nice piece of beef of rare quality sets up a Christmas dinner as traditional. I did one myself, but by the time I put it down and reached for my camera it was gone....c'est la vie.

Chris Young seems to have confirmed that they are working on a longer probe: https://www.reddit.com/r/combustion_inc/comments/1pvmkxb/stumps_smoker/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Happy Holidays, everyone! 👍👍

I think on the Johnny Harris's bottle it says "best if heated before using, and I think that is true. I put some in a sauce pan and heat it on low for a few minutes. Boiling would not help it any.Shelf life in the refrigerator, like a lot of barbecue sauces, is pretty long because of the proportion of vinegar in the mix. Different stroke for different folks- to each his own- but I think this is so good I could eat it on white bread. They also make a mustard-based sauce which I would only use on chicken, and I find it cooks off quickly, so I would apply that right at the end of a cook, or right after i take the meat off the grill. There's another mustard-based sauce from Lillie's of Charleston, though, "Hab Mussy", that has quite a kick and a little heat, so that one is work exploring, too.

Its a setup !!! I'm being framed 👹

I love my end-grain cutting board!

Hello Tekebo, I always show up to the race late, maybe because I like to give others a head start. Here though I'm inclined to think there probably right, all cutting boards were not created equally, that's evident of the condition of your knife after some use on various boards. Personally I like an end grain board because they wear slowly, they are durable, they have enhanced knife preservation, self healing properties and lastly...they are as handsome as hell. You know I use to make cutting boards, gave em out for Xmas and gifts although they weren't end grain....preparation in sanding was an issue while exposed long grain was easier to fashion. Never did think much on damage to my knives, every few months I'd just sharpen the lot. I would still have to say though, I prefer a board that turns heads just like a pretty girl. A wooden board will always have my heart and be on my table, it's naturally attractive.

Not guilty, I only ban the ones that are a first post and contains links to a hair loss remedy, weight loss treatments or ED medications lol

I really think you’re gonna like those.. Sent from my iPad using Tapatalk

My sister asked for a teak wine rack, and I love the results. It's one of my favorite projects in 35 years of building furniture professionally. These are my hand-hewn teak floors. https://handhewnfloors.com