JDBBQ Posted August 24, 2017 Author Report Share Posted August 24, 2017 My 32" KK arrived today !!! Only issue was that the delivery company guy's pallet jack wouldn't fit under the crate (pallet forks wrong width). Basically a screw up on their end. Luckily my landscaper was able to scoop it up with a Bobcat (forks adjustable) and take it off the truck. Its sitting in the yard and he will take it around to the patio later today/tomorrow. I am planning for the un-crating on Saturday. I want to do a low and slow (before the break in) for my son before he goes back to school next week. I think brisket is an all day cook? how long do ribs take as a "first cook" ? Thanks 1 Quote Link to comment Share on other sites More sharing options...
Flht01 Posted August 24, 2017 Report Share Posted August 24, 2017 Ribs can be done in 4 to 6 hours depending on your pit temps. A hot and fast brisket in about 8 hours give or take a little. I would lean towards something that cooks at a little higher temp than brisket or ribs and takes less time until you get use to regulating the dampers. Yardbird would be a good choice and would keep the smoker temps below the recommended burn-in temp's even if you cooked it hot. Good luck and have fun. Quote Link to comment Share on other sites More sharing options...
5698k Posted August 24, 2017 Report Share Posted August 24, 2017 Brisket is all day, or all night, depending on when you start. I do ribs at 275°, indirect, which is usually right at 4 hrs. Chicken can be much quicker, I like to do mine direct at about 350°, but that's not too critical. You can do it low/slo, but I prefer it otherwise. If you decide what you want to cook, it's easy to figure good ways to do it. Sent from my iPad using Tapatalk Quote Link to comment Share on other sites More sharing options...
Steve M Posted August 24, 2017 Report Share Posted August 24, 2017 My last brisket was about 15 pounds and I started it at around 9 at night. It was late afternoon the next day before I was able to take it off and let it rest for a couple of hours. I wished I had started earlier. I was cooking at 225. Ribs are a good safe choice and gives you a chance to become acquainted. Plan on 4-6 hours or so to get them to your liking. Quote Link to comment Share on other sites More sharing options...
tony b Posted August 24, 2017 Report Share Posted August 24, 2017 See if you can locate a small boneless pork shoulder/butt (say 4 or 5 lbs). Those will cook @ 250F in about the same time as ribs. You will be amazed at how juicy a whole chicken will come out on the KK. That's always a good safe 1st cook - almost impossible to screw up. 1 Quote Link to comment Share on other sites More sharing options...
JDBBQ Posted August 24, 2017 Author Report Share Posted August 24, 2017 Thanks for the ideasHere is crate. Ready to be opened ...Sent from my iPhone using Tapatalk 4 Quote Link to comment Share on other sites More sharing options...
CeramicChef Posted August 25, 2017 Report Share Posted August 25, 2017 @JDBBQ - congrats to ya! Take plenty of pics ... we love to see lots of uncrating pics. Dennis packs his KKs as well as he builds 'em. Quote Link to comment Share on other sites More sharing options...
JDBBQ Posted August 25, 2017 Author Report Share Posted August 25, 2017 Will do. A little rain tonight and pool party tomorrow. So likely Saturday AM. CheersSent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
DennisLinkletter Posted August 25, 2017 Report Share Posted August 25, 2017 On 8/12/2017 at 8:23 AM, Flht01 said: I'm still working on hitting target temps without overshooting. This morning I was at 300 before I got it settled in, about 50 degrees over my target. I went ahead and put the brisket on at 300 and did it Blu Dawg style. Remember that temperature is airflow if you're too hot reduce the volume of air. Charcoal always burns at the maximum volume for the loud airflow and it's the volume of Charcoal that creates the temperature. When you first light the grill the body will be absorbing a lot of the heat and it will give you a false too low reading, It's very easy to think you need more airflow and then when you give it more airflow you end up overshooting your target temperature. Try opening the chimney spinning the damper top until it's free, then turn it back and until it just touches the gasket and then move it one of those ears only 1.5" 2 Quote Link to comment Share on other sites More sharing options...
Bruce Pearson Posted August 25, 2017 Report Share Posted August 25, 2017 Oh boy! That crate looks great, wait till you see what's inside. Like CC said please take plenty of pictures, we love pictures! Quote Link to comment Share on other sites More sharing options...
ckreef Posted August 25, 2017 Report Share Posted August 25, 2017 You have really good willpower leaving that crate intact. Even with my second KK the crate top came off within minutes. Quote Link to comment Share on other sites More sharing options...
JDBBQ Posted August 25, 2017 Author Report Share Posted August 25, 2017 Not sure about that ... just wasn't home long enough to open (had a meeting and dinner I had to attend). Psyched my landscaper happened to have Bob Cat there. Saved me hours of rolling across yard and my son from hearing colorful language in the process Sent from my iPhone using Tapatalk 1 Quote Link to comment Share on other sites More sharing options...
JDBBQ Posted August 25, 2017 Author Report Share Posted August 25, 2017 Successful in uncrating !!! Sent from my iPhone using Tapatalk 4 1 Quote Link to comment Share on other sites More sharing options...
Steve M Posted August 25, 2017 Report Share Posted August 25, 2017 Gorgeous! A couple more steps and the real fun begins. Quote Link to comment Share on other sites More sharing options...
Bruce Pearson Posted August 25, 2017 Report Share Posted August 25, 2017 So far so good nice color. Be careful Quote Link to comment Share on other sites More sharing options...
MacKenzie Posted August 25, 2017 Report Share Posted August 25, 2017 I do love that colour. Quote Link to comment Share on other sites More sharing options...
ckreef Posted August 26, 2017 Report Share Posted August 26, 2017 Takes your breath away. 1 Quote Link to comment Share on other sites More sharing options...
JDBBQ Posted August 26, 2017 Author Report Share Posted August 26, 2017 First cook questions ..... Ok guys, I have my 32" KK unpacked and ready to go. As an aside, I have to add that the quality, fit, finish and attention to detail is amazing ! It feels like one is unwrapping parts that have made by a true craftsman. Not a common experience in these days of mass production. This grill and components is amazing. It was like Christmas in August! So for my first cook I am going to do some ribs. I am thinking 1/2 basket of cocochar with some wood chunks if I can pick some up quick (I will try the smoke pot thing later). Should I then put the heat deflector stand in and the big heat deflector stones? Then cook on the top rack at about 225 to 250? About 4 or 5 hours likely? Any comments/confirmations/suggestions would be great. Trying to get a cook in today to reward my meat loving son before he returns to school this week. Thanks Quote Link to comment Share on other sites More sharing options...
JDBBQ Posted August 26, 2017 Author Report Share Posted August 26, 2017 I just reread comments - will try ribs and pork shoulder at 275 or so for 4 to 6 hours. Any comments on the heat deflector and rack set up would be great - I guess I could also lay the drip pan in there? Cheers Quote Link to comment Share on other sites More sharing options...
Pequod Posted August 26, 2017 Report Share Posted August 26, 2017 All you need is a sheet of aluminum foil on a lower rack. That's it for deflector. Quote Link to comment Share on other sites More sharing options...